Voon Chun Hong, Assoc. Prof. Dr.
About Assoc. Prof. Dr. Voon Chun Hong
Assoc. Prof. Dr. Voon Chun Hong is currently a Associate Professor Dr. at Institute of Nano Electronic Engineering, Universiti Malaysia Perlis
He was formerly from School of Material Engineering
ORCID ID: https://orcid.org/0000-0002-9670-8868
Scopus Author ID: 55334719400
Email: Voon Chun Hong
(EDP Sciences, 2016)The reverse recovery lifetime of a diode is one the key parameter in power electronics market. To make a diode with fast switching speed, diodes are often doped with impurities such as gold and platinum to improve its ...
Effect of temperature of oxalic acid on the fabrication of Porous anodic alumina from Al-Mn alloys (Hindawi Publishing Corporation, 2013)The influence of temperature of oxalic acid on the formation of well-ordered porous anodic alumina on Al-0.5 wt% Mn alloys was studied. Porous anodic alumina has been produced on Al-0.5 wt% Mn substrate by single-step ...
(Taylor & Francis, 2014)Porous anodic alumina (PAA) has been produced on aluminium substrate by single-step anodising at 50 V in 0.3 M oxalic acid at 15°C for 60 min. The highly ordered pore and cell structure was achieved by subjecting the PAA ...
Effect of electrolyte concentration on the growth of porous anodic aluminium oxide (AAO) on Al-Mn alloys (Trans Tech Publications, Switzerland, 2012-12)In this study, the effect concentration of electrolyte on pore nucleation process during anodizing was investigated. It was found that the concentration of oxalic acid influenced the morphologies and regularities of porous ...
(Hindawi Publishing Corporation, 2012)The influence of manganese content on the formation of well-ordered porous anodic alumina was studied. Porous anodic alumina has been produced on aluminium substrate of different manganese content by single-step anodizing ...
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)In this study, the effect of manganese content, anodizing voltage and concentration of electrolyte on pore nucleation process during anodizing was studied from current density versus time transient. It was found that the ...
Synthesis of silicon carbide nanotubes from carbon nanotubes and silicon dioxide by microwaves irradiation (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)In this study, an attempt to fabricate silicon carbide nanotubes (SiCNTs) from the reactions between multiwalled carbon nanotubes (MWCNTs) and silicon dioxide (SiO2) is presented. Shape Memory Synthesis (SMS) method ...