Search
Now showing items 1-8 of 8
Miniaturization and broadbanding techniques for folded meander line microstrip antennas
(Institute of Electrical and Electronics Engineering (IEEE), 2009)
In this paper a Folded Meander Line Antenna (FMLA) had been designed to operate in WLAN b/g band. Fabricated on a FR-4 board for single layer prototype and RO3010 for two layers prototype. The design of this antenna is ...
Performance analysis and prediction using circuit model in a microstrip patch array
(Institute of Electrical and Electronics Engineering (IEEE), 2007)
This work is an effort in investigating and modeling an accurate Circuit Model derived from the Transmission Line Method (CM/TLM) by simulating a rectangular microstrip patch array using two different simulation techniques, ...
Performance comparison of serial and corporate feeding networks in a rectangular Microstrip patch antenna array
(Kolej Universiti Teknologi Tun Hussein Onn, 2006-12-19)
One of the important aspects of a microstrip patch antenna array is the availability of the two feeding networks applicable to them, which are the serial and corporate feeding. A good impedance matching and optimal radiation ...
Small rectangular parasitic plane as patch antenna ground plane for broadband WLAN application
(Institute of Electrical and Electronics Engineering (IEEE), 2007)
This paper proposed a microstrip patch antenna for broadband WLAN application. The antenna is based on an octagonal patch, which is simulated and analyzed by using Microwave Office (MWO) for WLAN applications. The designed ...
Comparison of Direct Contact Feeding methods for a Rectangular Microstrip Patch Antenna
(Universiti Malaysia Perlis, 2007)
Microstrip patch antennas have a variety of feeding technique applicable to them. It can be categorized in accordance to the main power transfer mechanism from the feed line to the patch. Contactingfeeds investigated in ...
Design of a microstrip patch antenna using low temperature co-fired ceramic technology
(Institute of Electrical and Electronics Engineering (IEEE), 2008-12-01)
This paper presents the design of a single rectangular microstrip patch antenna for operation at 2.4 GHz frequency on Radio Frequency (RF) antenna application using Low Temperature Co-fired Ceramic (LTCC) technology. LTCC ...
The effect of conductor line to meander line antenna design
(Institute of Electrical and Electronics Engineering (IEEE), 2008)
In this paper, the meander line antenna (MLA) have been designed to operate at 2.4-GHz for WLAN application. Two different designs of meander line antenna are investigated, without conductor line and with conductor line. ...
A dual band planar monopole antenna with inverted-M parasitic plane
(Institute of Electrical and Electronics Engineering (IEEE), 2007)
Introduction of parasitic plane as additional radiator helps to produce desired resonant frequencies, while helping to minimize the size of the antenna. A dual-band monopole antenna with parasitic plane is designed to ...