School of Mechatronic Engineering (FYP): Recent submissions

Now showing items 41-60 of 71

    • Damage detection of PVC (poly vinyl chloride) and ABS (Acrylonitrile-Butadiene-Stryrene) pipe using non destructive vibration testing 

      Mohd Haris, Md Mahiyuddin (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009-03)
      Experimental modal analysis has grown steadily in popularity since the advent of the digital FFT spectrum analyzer in the early 1970’s. Today, impact testing (or bump testing) has become widespread as a fast and economical ...

    • Study of reverberation time for different mosque structure 

      Mohd Hairul, Mohd Yusoff (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009-03)
      In the process to define the acoustic quality for an enclosed room, there are numbers of method and indicators that can be applying. One of them is using the Reverberation Time (RT60) as indicators. Optimum RT60 based on ...

    • The size effect on fatigue strength of mild steel 

      Mohd Hafiz, Zolkhiflee (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009-04)
      Fatigue evaluates the effects of material shape, surface condition, stress level, material size and related factors on fatigue life of metallic materials. These studies focused on experimental analysis to compare the effect ...

    • Stress corrosion cracking behavior of austenitic stainless steel in 3.5 wt % sodium chloride (NaCI) solution 

      Mohd Firdaus, Jaafar (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009-04)
      Stress corrosion cracking is the formation of brittle cracks in a normally sound material through the simultaneous action of a tensile stress and a corrosive environment. Stress corrosion cracking occurs when there have ...

    • Design a biofidelic dummy neck for crashworthiness application 

      Mohd Fidzwan, Md Amin Hamzas (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009)
      This project present designs a biofidelic dummy neck for crashworthiness application. The project is focused on simulate a neck response during a test in flexion or extension condition. The data such as total weight, ...

    • Design of notebook cooling pad 

      Mohd Fakhrurazi, Jamaludin (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009-03)
      Nowadays, laptop has become popular because its reliability but in a size that easily to carry. Unfortunately, the operating temperature from the laptop is not good for long-term life of the laptop and its performance ...

    • Designing a mini model of wind turbine blades based on Vertical Axis Wind Turbine model 

      Mohd Faizal, Ismail (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009-05)
      A wind turbine is a machine that converts wind's kinetic energy into rotary mechanical energy, which is then utilize to perform a certain work. In more advanced models, the rotational energy is converted into electricity ...

    • Design and analysis of a cross flow heat exchanger 

      Mohd Fairuz, Mohd Hassim (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009-06)
      This project is about design and analysis a cross flow heat exchanger. In this project, an experiment about Diesel Engine Cycle and a Cross Flow Heat Exchanger system have been done in laboratory internal combustion ...

    • Data analysis of noise at different school of environment 

      Mohd Erfy, Ismail (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2009-04)
      This research concentrates on the investigation of different existing school environment’s noise exposures to determine the most suitable surrounding for schools and effects of noise exposure to students and teachers. Three ...

    • Design and analysis of a shell and tube heat exchanger (one shell pass and one tube pass) 

      Chua, Wai Hoong (Universiti Malaysia Perlis (UniMAP)School of Mechatronic Engineering, 2009-04)
      A shell and tube heat exchanger (one shell pass and one tube pass) is a heat exchange device between hot fluid and cold fluid. It is used widely in process industry for cooling, heating and heat exchange stream in ...

    • Wireless monitoring system (Smart home – Security systems) 

      Noorashidin, Abdul Rahim (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2008-03)
      Wireless monitoring system is a project which could give assurance for user to protect their homes from burglars, thieves and criminals. This idea was acquired after intensive observation based on local news nowadays which ...

    • Library book locater 

      Teh Keat Yeok (Universiti Malaysia PerlisSchool of Mechatronics Engineering, 2008-05)
      This research is concerned about design and construction of mobile robot, Library Book Locater. The mobile robot is designed to locate the location of a book in a library bar code. This mobile robot reduces time taken to ...

    • Design and development of an intelligent paper, plastic and bottle segregation (Prototype) system 

      Maheswaran a/l Degarajan (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2008-03)
      The project is intended to reduce a major portion of unrecyclable materials especially paper and plastics are left uncollected from domestic wastes due to lack of efficient and economical waste sorting mechanism. This ...

    • Myoelectric signal based lower arm prosthesis 

      Safuan Mohd (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2008-03)
      This study is mainly on the control of the stepper motor by using the electromyographic (EMG) signals. When a muscle is contracted, a feeble electric potential is produced. Surface electrodes can sense this muscle activity ...

    • A controller to perform a visually tracking task in laboratory environment 

      Intan Maisarah, Abd Rahim (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2008-04)
      This project is to develop the software for controller to perform a visually guided tracking task in laboratory environment. The image processing include image conversion, applying filter to remove noise, edge detection, ...

    • Condition monitoring in vehicle cabin using vibration signal characterization 

      Muhammad Naufal Mansor (School of Mechatronic Engineering, 2008-03)
      This paper presents an approach to the condition monitoring in vehicle. A vibration test profiles is obtained in road testing of sedan sized car. The first step is to define the performance parameters under study. The ...

    • Design and analysis of a humanoid head robot using CATIA 

      Md Muzamil Mohammad (School of Mechatronic Engineering, 2008-04)
      This report describes the design of humanoid robot head by using CATIA. This design is developed to show the expression of human-like emotion based on the clue done by other research group and also daily observation from ...

    • Mobile robot positioning system 

      Khairulnizam Othman (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2008-03)
      The report has examined the design, development and implementation of 4 Wheels Mobile Robots that implemented with Positioning System that can perform nonconventional maneuver. The report presents the process undertaken ...

    • Solar car drive controller and electrical system design 

      Choi Kian Keong (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2008-03)
      Solar car is one of most electric vehicles in humans live today. This project is consists of embedded system design to drive controller and electrical system for solar car prototype. Objectives of this project is study ...

    • Humidity, temperature and air velocity data logger for thermal comfort application 

      Rashila Baharudin (Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2008-04)
      The mistreat operation of an air conditioning system will affect human welfare and health such as headaches and drowsiness. Because of this problem a thermal comfort application must be created to overcome this problem. ...