Browsing Mohd Arif Anuar Mohd Salleh, Associate Professor Dr. Ir. by Issue Date

Now showing items 21-40 of 43

    • Natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) ternary blend: Curing characteristics and swelling test 

      Nik Zakaria, Nik Yahya; Nik Noriman, Zulkepli, Dr.; Mohd Arif Anuar, Mohd Salleh; Hanafi, Ismail, Prof.; Ragunathan, Santiagoo (Trans Tech Publications, 2014)
      Curing characteristics and swelling behavior of natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) blends were investigated. Eleven composition ratio; 50/50/0, 50/40/10, 50/30/20, 50/20/30, ...

    • Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature 

      Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Zarina, Yahya; Mohd Arif Anuar, Mohd Salleh; Nurhamidah, Zakaria; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2014)
      This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...

    • Low and high temperature isothermal aging effect on morphology and diffusion kinetics of intermetallic compound (IMC) for Sn-Cu-Si ₃N₄ composite solder 

      Norainiza, Saud; Najib Saedi, Ibrahim; Mohd Arif Anuar, Mohd Salleh (Trans Tech Publications, 2014)
      The effect of excessive intermetallic growth to the reliability of solder joints become major problem in electronic devices industry. In this study, we used Sn-Cu-Si₃N₄ composite solder to observe the intermetallic compound ...

    • An investigation of TiO2 addition on microstructure evolution of Sn-Cu-Ni solder paste composite 

      Norainiza, Saud; Rita, Mohd Said; Mohd Arif Anuar, Mohd Salleh; Mohd Nazree, Derman; Mohd Izrul Izwan, Ramli; Norhayanti, Mohd Nasir (EDP Sciences, 2016)
      In this research, varying fraction of titanium oxide (TiO2) reinforcement particles was successfully incorporated into Sn-Cu-Ni solder paste in an effort to study the influence of TiO2 addition on microstructure evolution ...

    • Influence of Activated Carbon Particles on Intermetallic Compound Growth Mechanism in Sn-Cu-Ni Composite Solder 

      Mohd Izrul Izwan, Ramli; ‪Mohd Arif Anuar, Mohd Salleh; Mohd Nazree, Derman; Rita, Mohd Said; Norainiza, Saud (EDP Sciences, 2016-10)
      The influence of Activated Carbon (AC) particles on mechanical properties of Sn-Cu-Ni-xAC solder joint was investigated. Five different Activated Carbon (AC) percentage addition (0 wt. %, 0.25 wt. %, 0.5 wt. %, 0.75 wt. ...

    • Nickel (Ni) microalloying additions in Sn-Cu lead-free solder. short review 

      Mohd Arif Anuar, Mohd Salleh; Sandu, I G; Mohd Mustafa Al Bakri, Abdullah; Sandu, I (IOP Publishing Ltd, 2017-06)
      In this digital-age era, solder plays important role in electronic packaging industries. As interconnects material, solder provide an electrical and mechanical support to the electronics devices. Solder usually consist of ...

    • Phase study of titanium dioxide nanoparticle prepared via sol-gel process 

      Oladeji Araoyinbo, Alaba; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Nurul Nadia, Abdul Aziz; Azwan Iskandar, Azmi (IOP Publishing Ltd, 2018-03)
      In this study, titanium dioxide nanoparticles have been prepared via sol-gel process using titanium tetraisopropoxide as a precursor with hydrochloric acid as a catalyst, and ethanol with deionized water as solvents. The ...

    • Recent graphene oxide/TiO₂ thin film based on self-cleaning application 

      A. Azani; Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Ayu Wazira, Azhari; Chobpattana, V. (IOP Publishing Ltd, 2019-08)
      Graphene oxide/TiO₂ (GO/TiO₂) thin films works as self-cleaning device have been developed in various method onto selected substrates. It was noticeable that graphene oxide is the best form in the group of graphene family. ...

    • Mesoporous structure of doped and undoped PEG on Ag/TiO₂ thin film 

      Kamrosni, Abdul Razak; Dewi Suriyani, Che Halin; Azliza, Azani; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Suhaila, Sepeai (IOP Publishing Ltd, 2019-08)
      In this reaserch, photocatalyst silver titanium dioxide was doped and modified by Polyethylene Glycol (PEG). The purpose of the present study was to analyse the synthesized Ag/TiO₂ thin film doped and undoped PEG. Ag/TiO₂ ...

    • Graphene geopolymer hybrid: a review on mechanical properties and piezoelectric effect 

      Nuaim Siddiqi, Danial; Dewi Suriyani, Che Halin; Muhammad Mahyiddin, Ramli; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Siti S., Mat Isa; L. F., A. Talip; N. S., Mazlan (IOP Publishing Ltd, 2019-08)
      A review on graphene geopolymers hybrid is presented, focusing on the mechanical properties and piezoelectric effect. The method and way of mixing graphene with geopolymers are discussed, including form of graphene that ...

    • Microstructure and wettability of Graphene Oxide/TiO2 thin film prepared via sol-gel method 

      Azliza, Azani; Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Suhaila, Sepeai (IOP Publishing Ltd, 2019-08)
      The microstructure of graphene oxide TiO2 (GO/TiO2) films on wettability and morphology properties were studied at different amount of Titanium isopropoxide with fixed amount of GO. GO/TiO2 thin films were prepared by using ...

    • The effect of Bi on the microstructure, electrical, wettability and mechanical properties of Sn-0.7Cu-0.05Ni alloys for high strength soldering 

      ‪Mohd Izrul Izwan, Ramli‬; Mohd Arif Anuar, Mohd Salleh; H., Yasuda; J., Chaiprapa; K., Nogita (Elsevier, 2019-10)
      This paper elucidated the effects of the Bi element (0 wt%, 0.5 wt% and 1.5 wt%) on the microstructure, electrical, wettability and mechanical properties of the Sn-0.7Cu-0.05Ni as a high strength solder. Besides using the ...

    • Effect of graphene oxide on microstructure and optical properties of TiO₂ thin film 

      Azliza, Azani; Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Mohd Fairul Sharin, Abdul Razak; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Ayu Wazira, Azhari; Chobpattana, Varistha (IOP Publishing Ltd, 2019-12)
      GO/TiO₂ thin films have been synthesized from titanium (IV) isopropoxide (TTIP) by a sol-gel method. The films were deposited onto a glass substrate using spin coating deposition technique then were subjected to annealed ...

    • Synthesis and charactherization of TiO₂ doped SnO₂ thin film prepared by sol-gel method 

      Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Azliza, Azani; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Nur Syahirah, Shafee; Muhammad Mahyiddin, Ramli; Ayu Wazira, Azhari; Chobpattana, Varistha (IOP Publishing Ltd, 2019-12)
      In this work, preparation of titanium dioxide doped with tin oxide, SnO₂/TiO₂ thin films deposited onto silicon wafer via sol-gel method. Different amount of SnO₂ was added (5 ml, 10ml and 15 ml) into parent solution. The ...

    • Microstructural studies of doped PEG Ag/TiO₂ thin film 

      Kamrosni, Abdul Razak; Dewi Suriyani, Che Halin; Azliza, Azani; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Chobpattana, Varistha; Ayu Wazira, Azhari (IOP Publishing Ltd, 2019-12)
      Ag/TiO₂ thin film was prepared by the sol-gel method through the hydrolysis of titanium tetraisopropoxide and silver nitrate solution. Various amount of PEG was doped into the solution preparation to study the effect on ...

    • A review of geopolymer ceramic as a potential reinforcement material in solder alloys 

      Nur Nadiah‘Izzati, Zulkiflii; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh (IOP Publishing Ltd, 2019-12)
      Nowadays, lead-free solder has been currently used in electronic packaging technology as part of soldering material. Since SnPb was detected to produce toxicity and might harm the consumers, the usage of Pb solder has been ...

    • Influence of kaolin geopolymer ceramic additions to the wettability and electrical properties of Sn-3.0Ag-0.5Cu (SAC305) lead free solder 

      Nur Syahirah, Mohamad Zaim; Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Marliza, Mostapha; Romisuhani, Ahmad (IOP Publishing Ltd, 2019-12)
      The effect of kaolin geopolymer ceramic addition to the wettability and electrical resistivity of Sn-3.0Ag-0.5Cu (SAC305) lead free solder was successfully explored. Powder metallurgy with microwave sintering method was ...

    • Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on OPC substrate 

      Warid Wazien, Ahmad Zailani; Bouaissi, Aissa; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Yoriya, Sorachon; Mohd Arif Anuar, Mohd Salleh; Mohd Remy Rozainy, M. A. Z.; Hamzah, Fansuri (MDPI AG, 2020-05)
      This investigative study aims to study the mechanical and morphological properties of fly ash (FA)-based geopolymer paste as a repair material when applied on ordinary Portland cement (OPC) overlay concrete. The first part ...

    • Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on OPC substrate 

      Warid Wazien, Ahmad Zailani; Bouaissi, Aissa; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Yoriya, Sorachon; Mohd Arif Anuar, Mohd Salleh; Mohd Remy Rozainy, M. A. Z.; Hamzah, Fansuri (MDPI AG, 2020-05)
      This investigative study aims to study the mechanical and morphological properties of fly ash (FA)-based geopolymer paste as a repair material when applied on ordinary Portland cement (OPC) overlay concrete. The first ...

    • Microstructure evolution of Ag/TiO₂ thin film 

      Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Arif Anuar, Mohd Salleh; Mohd Izrul Izwan, Ramli; Mohd Mustafa Al Bakri, Abdullah; Ayu Wazira, Azhari; Kazuhiro, Nogita; Hideyuki, Yasuda; Nabiałek, Marcin; Wysłocki, Jerzy J. (MDPI AG, 2021-01)
      Ag/TiO₂ thin films were prepared using the sol-gel spin coating method. The microstructural growth behaviors of the prepared Ag/TiO₂ thin films were elucidated using real-time synchrotron radiation imaging, its structure ...