Search
Now showing items 1-10 of 19
The thermal expansion behaviors of Cu-SiCp composites
(Trans Tech Publications, 2013)
The demand for advanced thermal management materials such as silicon carbide reinforced copper matrix (Cu-SiCp) composites is increasing due to their high thermal conductivity and low CTE properties. However, the weak ...
Synthesis and characterization of electroless copper coated SiC particles
(Trans Tech Publications, 2013)
Silicon carbide reinforced copper matrix (Cu-SiCp) composites fabricated via the conventional powder metallurgy methods have inferior thermophysical properties due to the weak bonding between the copper matrix and the SiCp ...
The corrosion studies of powder metallurgy Co-Cr-Mo (F-75) alloy
(AENSI Publisher All rights reserved, 2013-10)
Co-Cr-Mo (F-75) alloy was investigated for biomedical application due to its mechanical properties and good corrosion resistance. This study has been focusing on the corrosion behavior of PM Co-Cr-Mo alloy. The Co-Cr-Mo ...
Overview of pathogenic micro-organisms destruction in contaminated water by oxide photocatalysis
(Trans Tech Publications, 2013)
The titanium dioxide (TiO2) is a semiconductor oxide photocatalys, which is chemically and biologically inert but exhibits excellent photolytic activity in the ultraviolet (UV) region. Progress in photocatalytic water ...
Grafting amino-acid molecular imprinted polymer on carbon nanotube for sensing
(Elsevier Ltd., 2013)
Molecular imprinted polymer (MIP) is a good matrix that exhibit satisfactory recognition ability when integrated onto sensing transducer. We report on the preparation of such material by graft-polymerizing MIP on the surface ...
Corrosion behavior of Al-Cu-Ni-Y alloys
(Trans Tech Publications, 2013)
Al based alloy has been widely used in various industries. This research paper aims at the investigation onto the effect of the percentage of Cu and Ni alloying elements in the corrosion behavior of Al-Cu-Ni alloys. The ...
The effect of electrolyte temperature on formation of porous aluminium oxide films in anodising process
(AENSI Publisher All rights reserved, 2013-10)
A porous aluminium oxide film formed on aluminium was prepared in a mixed electrolyte of phosphoric acid and acetic acid solution. The morphology, growth and thickness of the film were investigated. The anodising process ...
Effect of sintering on the physical and mechanical properties of Co-Cr-Mo (F-75)/HAP composites
(Universiti Kebangsaan Malaysia, 2013-12)
This paper reports on the effects of HAP addition and sintering temperature on the microstructure and properties of the F-75/HAP composites fabricated by powder metallurgy. Co-Cr-Mo (F-75) is used in orthopedics because ...
Electrochemical characterisation of hybrid activators for aluminium sacrificial anodes in natural sea water
(Malaysian Citation Centre & Ministry of Education, 2013)
This paper reports on the electrochemical behaviour of as-cast Al-Zn-Mg alloys activated by tin (Sn) and ruthenium dioxide (RuO2) in natural sea water. The potential and advantages of Sn and RuO2 as hybrid activators in ...
Effect of heat treatment on microstructure and corrosion behavior of Az91d magnesium alloy
(Trans Tech Publications, 2013)
An AZ91D ingot in the as-cast condition was homogenized by heat treatment process. Then, the microstructures produced and corrosion behaviour after heat treatment was studied in detail. As-cast AZ91D was recrystallize by ...