Search
Now showing items 1-10 of 20
FTIR and XRD characterization of kaolin geopolymer based on solids-to-liquid and alkaline activator ratios
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
This paper covers the results of X-ray powder diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) in assessing the phase identification and functional group of kaolin geopolymer based on the different ...
Fly ash porous material using geopolymerization process for high temperature exposure
(MDPI AG (Basel, Switzerland), 2012-04)
This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers ...
Study on properties and morphology of kaolin based geopolymer coating on clay substrates
(Trans Tech Publications, 2013-12)
The application of geopolymer as a coating was not widely explored by other researchers and therefore the study of kaolin based geopolymer coating applied on different types of clay substrate (unsintered and sintered) was ...
Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder
(Scientific.Net/Trans Tech Publications, 2012-12)
The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ...
Potential of marine clay as raw material in geopolymer composite
(Scientific.Net/Trans Tech Publications, 2012-12)
In this research, marine clays has been studied its potential as a matrix composite materials that tend to be used as alternative materials to concrete. The study shows that marine clays which mixed with appropriate ...
Strength and microstructural properties of mechanically-activated kaolin geopolymers
(Trans Tech Publications, 2012-12)
Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...
Study on fly ash based geopolymer for coating applications
(Trans Tech Publications, 2013)
Geopolymer is cementitious binders that do not require the presence of ordinary Portland cement (OPC). Fly ash with geopolymer formulations prepared with mixing alumino-silicate with the alkaline activator solution has ...
Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer
(Trans Tech Publications, 2012)
Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...
Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength
(Trans Tech Publications, 2013)
Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...
Polyolefin layered silicates nanocomposites - A review
(Trans Tech Publications, 2014)
A review is given of polyolefins layered silicates nanocomposites. This group of commodity thermoplastic is widely used and gain a great attention among researcher now days for nanocomposite preparation with layered silicates ...