constructions. This study develop new products made of by biomass ash from industry waste for the internal partitions panel. Modifying the internal partition panel of wall with addition of biomass ash (EFB) and clay soils ...

The tribological behavior of tow AlSi alloys under the influence of surface roughness average was investigated for the present study. The silicon content of these alloys ranged 10 and 16-wt% Si, and includes hypoeutectic ...

The effect of surface roughness average of hypereutectic aluminum silicon alloys (with 16 wt% Si) on the friction and wear was investigated. Various surface roughness average (Ra) of different degrees was verified as well ...

The behavior of wear for dry alloy A390 of (aluminum–silicon) casting which constitutes 16% Si is investigated. The lost of the wear rate is weighted and the volume decreases with increasing speed of sliding as well as ...

Nanoporous alumina was produced by anodic oxidation of aluminum in both acidic and alkaline electrolytes. Previous reports indicate that nanoporous aluminais mainly produced from strongly acidic electrolytes, and with the ...

Material used for aluminium product usually made of aluminium scrap. Currently, the price of aluminium scrap is increase. It is necessary to minimize the cost of production by reducing the weight of the aluminium product ...

Feasibility of using recycled-Aluminum (re-Al) as reinforcement particulates in Sn-0.7Cu is assessed by powder technology method, whereby re-Al particulates are produced from discarded aluminum beverage cans. This paper ...