Search
Now showing items 1-7 of 7
Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys
(Slovak Academy of Sciences, 2010-03-01)
The influence of superheat treatment on the microstructure and dynamic mechanical properties
of A357 alloys has been investigated. The study of microstructure was performed by optical
microscope. Dynamic mechanical ...
Development of coconut fiber with the addition of fly ash for cement panel application in construction
(Universiti Malaysia Perlis (UniMAP), 2010-10-16)
Natural fibers exist in large quantities and have been classified as waste materials. Coconut fiber is one of them and it is used as addition in fabrication of cement panel. Industrial waste materials such fly ash is ...
Physical properties of FG HAP-F75 fabricated by powder metallurgy
(Universiti Malaysia Perlis (UniMAP), 2010-10-16)
Functional graded (FG) HAP-F75 was prepared by powder metallurgy technique. Three layers of functional graded HAP-F75 was fabricated using single punch hydraulic press. The fabrication technique consists of mixing, pressing ...
Preliminary study of hap addition to Co-Cr-Mo alloy fabricated by powder metallurgy method
(SIRIM, 2010-11-22)
This preliminary study of HAP addition in Co-Cr-Mo (F-75) was carried out by powder metallurgy method. The lab work comprises the mixing of Co-Cr-Mo with different HAP (hydroxyapatite) composition which varied from 0 wt. ...
Microstructure and microhardness properties of Fe-Cr-Al2O3 composites
(Universiti Putra Malaysia (UPM), 2010)
The requirement for high performance materials of high wear and corrosion resistance lead to an increasing interest in ferrous matrix composites. Metal matrix composite of iron-chromium reinforced with alumina was fabricated ...
The effects of Al2O3 amount on the microstructure and properties of Fe-Cr matrix composites
(Springer, 2010-12)
Iron based matrix composites reinforced with 5 to 25 wt pct of Al2O3 particles were fabricated using the powder metallurgy method. The samples were prepared by mixing at 250 rpm for 30 minutes, uniaxially pressing at 750 ...