Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Author "Saidatulakmar, Shamsuddin"

Now showing items 1-4 of 4

    • Dry sliding wear and compressive strength of Fe-Cr matrix composite with and without Al2O3 reinforcement 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Saidatulakmar, Shamsuddin; Zuhailawati, Hussain; Zainal Arifin, Ahmad (IEEE Conference Publications, 2011)
      Fe-Cr matrix composites reinforced with Al2O3 particulates fabricated by powder metallurgy (PM) method offer potential for cheaper wear resistance materials and high temperature application. The influence of Al2O3 amount ...

    • The effects of Al2O3 amount on the microstructure and properties of Fe-Cr matrix composites 

      Saidatulakmar, Shamsuddin; Shamsul Baharin, Jamaludin, Prof. Dr.; Zuhailawati, Hussain; Zainal Ariffin, Ahmad (Springer, 2010-12)
      Iron based matrix composites reinforced with 5 to 25 wt pct of Al2O3 particles were fabricated using the powder metallurgy method. The samples were prepared by mixing at 250 rpm for 30 minutes, uniaxially pressing at 750 ...

    • Fabrication and characterisation of powder metallurgy Fe-Cr Matrix composites reinforced with Al2O3 

      Saidatulakmar, Shamsuddin; Shamsul, Baharin Jamaludin, Prof. Dr.; Zuhailawati, Hussain, Dr.; Zainal Arifin, Ahmad, Prof. (Trans Tech Publications, 2013)
      Sintered powder metallurgy Fe based composites with advanced mechanical properties have been proposed as substitutes for more expensive cemented carbide and wrought alloys in many applications, especially as inexpensive ...

    • Microstructure and microhardness properties of Fe-Cr-Al2O3 composites 

      Saidatulakmar, Shamsuddin; Shamsul Baharin, Jamaludin, Prof. Dr.; Zuhailawati, H.; Zainal Arifin, A. (Universiti Putra Malaysia (UPM), 2010)
      The requirement for high performance materials of high wear and corrosion resistance lead to an increasing interest in ferrous matrix composites. Metal matrix composite of iron-chromium reinforced with alumina was fabricated ...