Now showing items 1-20 of 88

    • Aluminium - Polymer abs product 

      Mohd Ichwan, Nasution; Kamaruddin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Khairel Rafezi, Ahmad; Faizul, Che Pa; Chek Idrus, Omar (Universiti Malaysia Perlis (UniMAP), 2012)
      Material used for aluminium product usually made of aluminium scrap. Currently, the price of aluminium scrap is increase. It is necessary to minimize the cost of production by reducing the weight of the aluminium product ...
    • Assessment of physical and mechanical properties of cement panel influenced by treated and untreated coconut fiber addition 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Mohamed Iylia, Anwar; Mazlee, Mohd Noor, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Alida, Abdullah (Elsevier BV, 2011)
      This project was conducted to produce a cement panel with the addition of treated and untreated coconut fiber in cement panel. Coconut fiber was added to replace coarse aggregate (sand) in this cement panel. In this project, ...
    • Bahan NANO dan aplikasinya 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin, Prof. Madya Dr. (Kolej Universiti Kejuruteraan Utara Malaysia, 2004-09)
    • A brief review of layered rock salt cathode materials for lithium ion batteries 

      Tan, Tze Qing; Soo, Soon Peng; Azmi, Rahmat, Prof.; Shamsul Baharin,  Jamaludin, Prof. Dr.; Rozana Aina, Maulat Osman, Dr. ; Zul Azhar, Zahid Jamal, Dato Prof. Dr.; Mohd Sobri, Idris, Dr. (Trans Tech Publications, 2013)
      Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly used cathode material but Co is costly and toxic. Thus, ...
    • Characterization of F75-HAP produced by Powder Metallurgy method 

      Nur Maizatul Shima, Adzali; Shamsul Baharin, Jamaludin; Mohd Nazree, Derman; Nur Hidayah, Ahmad Zaidi (Universiti Malaysia Perlis, 2009-12-01)
      This research was carried out to study the properties of Co-Cr-Mo filled with different composition of HAP that have been prepared by powder metallurgy method. The raw materials used in this research were Co-Cr-Mo powder ...
    • Characterization of porous aluminum fabricated via sintering- dissolution process (SDP) 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Nik Mohd Fikry, Mohd Rushdi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...
    • Cobalt Implant Composite (CIC) 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi; Mazlee, Mohd. Noor (Ministry of Higher Education (MOHE), 2005-09-30)
      Cobalt implant composite (CIC) was fabricated in KUKUM by powder metallurgy technique.
    • Comparative characterization of Clinker’s microstructure at different temperature zone during cement production 

      Mohd Sobri, Idris; Khairul Nizar, Ismail; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (Science Publications, 2007)
      Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ...
    • Comparative study of corrosion behavior of AA2014/15 Vol%Al2O3p and AA2009/20 Vol% SiCw 

      Shamsul Baharin, Jamaludin; Z. Yusoff; Khairel Rafezi, Ahmad (Portuguese Electrochemical Society, 2008)
      The influence of heat treatment on the corrosion behavior of two aluminium matrix composites (AA2014/15 vol% Al2O3p - composite A and AA2009/20 vol% SiCw - composite B) was analyzed in 3.5% sodium chloride solution. The ...
    • Comparative study on thermal, compressive, and wear properties of palm slag brake pad composite with other fillers 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2011)
      The attractive performance-to-cost ratio associated with the incorporation of waste material in composite formulations used to produce brake pads has stimulated the idea of exploring the possible incorporation of additional ...
    • Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Slovak Academy of Sciences, 2010-03-01)
      The influence of superheat treatment on the microstructure and dynamic mechanical properties of A357 alloys has been investigated. The study of microstructure was performed by optical microscope. Dynamic mechanical ...
    • Composite cement reinforced coconut fiber: physical and mechanical properties and fracture behavior 

      Alida, Abdullah; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (INSInet Publications, 2011)
      This research paper reports the effect of natural fiber content on the physical and mechanical properties as well as fracture behavior of composite cement reinforced with coconut fiber. The mix design was based on 1:1 for ...
    • Compressive strength and crack propagation of cement composites reinforced coconut fibre 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Medwell Journals, 2012)
      This study presents the compressive strength and crack propagation of cement composites reinforced coconut fibre. The development of cement composites in this research were done by substituting coconut fibre to the portion ...
    • The corrosion studies of powder metallurgy Co-Cr-Mo (F-75) alloy 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Nazree, Derman, Dr.; Juyana, A Wahab          (AENSI Publisher All rights reserved, 2013-10)
      Co-Cr-Mo (F-75) alloy was investigated for biomedical application due to its mechanical properties and good corrosion resistance. This study has been focusing on the corrosion behavior of PM Co-Cr-Mo alloy. The Co-Cr-Mo ...
    • Development of a Lid Sealed furnace for the production of Magnesium alloys 

      Shaiful Rizam, Shamsudin; Azmi, Kamardin; Mohd Nazree, Derman; Shamsul Baharin, Jamaludin; Azremi, Abdullah Al Hadi; A.M.H. Firdaus; Mazlee, Mohd Noor; C.I. Mahdi; Abdul Razak, Daud; Roslinda, Shamsudin (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      An atmosphere-controlled furnace was designed for the casting process of highly reactive Mg metal and its alloys. Instead of open crucible furnace, the melting process was done under controlled atmosphere which contained ...
    • The development of cement composites reinforced coconut fiber with fly ash addition: mechanical properties and fracture behaviour 

      Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Nur Izzati, Muhd Nadzri (Trans Tech Publications, 2013)
      This research paper presents a study on the development of cement composites reinforced coconut fiber with fly ash addition. Various content of coconut fiber (3 wt. %, 6 wt. %, 9 wt. %, 12 wt. % and 15 wt. %) was added to ...
    • Development of coconut fiber with the addition of fly ash for cement panel application in construction 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Natural fibers exist in large quantities and have been classified as waste materials. Coconut fiber is one of them and it is used as addition in fabrication of cement panel. Industrial waste materials such fly ash is ...
    • Development of dense hydroxyapatite-ni by modified electroless deposition technique. 

      Sri Asliza, Md Amin; Mohd Zaheruddin, Kasmuin; Azmi, Rahmat, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      Ni deposited on HA powder was prepared by electroless plating process without sensitization and activation treatment. The deposited powder obtained was characterized by energy dispersive spectroscopy (EDX) and x-ray ...
    • Dry sliding wear and compressive strength of Fe-Cr matrix composite with and without Al2O3 reinforcement 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Saidatulakmar, Shamsuddin; Zuhailawati, Hussain; Zainal Arifin, Ahmad (IEEE Conference Publications, 2011)
      Fe-Cr matrix composites reinforced with Al2O3 particulates fabricated by powder metallurgy (PM) method offer potential for cheaper wear resistance materials and high temperature application. The influence of Al2O3 amount ...
    • Effect of alloying elements (Ni and Cr) on density and hardness of Co alloy fabricated by powder metallurgy 

      Raudhah, Othman; Shamsul Baharin, Jamaludin; Mohd Nazree, Derman (Universiti Malaysia Perlisp.1-5, 2009-12-01)
      Influences of Ni and Cr addition on the properties of powder metallurgy Co base alloys were investigated. The alloys were produced by powder metallurgy technique and sintered under argon atmosphere. Scanning electron ...