Now showing items 1-20 of 23

    • An application of finite element modelling to pneumatic artificial muscle 

      Ramasamy, Ravichandran; Mohd. Rizon, Mohamed Juhari, Prof. Ir. Dr.; Mohd Rozailan, Mamat, Prof. Madya Dr.; Sazali, Yaacob, Prof. Dr.; Nashrul Fazli, Mohd Nasir, Dr.; Sugisaka, Masanori (Science Publications, 2005)
      The purpose of this article was to introduce and to give an overview of the Pneumatic Artificial Muscles (PAMs) as a whole and to discuss its numerical modelling, using the Finite Element (FE) Method. Thus, more information ...
    • Biomedical electronics engineering at Universiti Malaysia Perlis 

      Nashrul Fazli, Mohd Nasir, Dr.; Ahmad Faizal, Salleh, Dr.; Nazahah, Mustafa; Saidatul, A.; Aisyah Hartini, Jahidin; Megat Syahirul Amin, Megat Ali; M., Rizon (Springer Berlin Heidelberg, 2008)
      Universiti Malaysia Perlis (UniMAP) is one of the public higher learning institutions in Malaysia to offer Biomedical Engineering at the undergraduate level. Biomedical engineering is a new branch of engineering which apply ...
    • Blood cell image segmentation: a review 

      Robiyanti, Adollah; Mohd Yusoff, Mashor, Prof. Dr.; Nashrul Fazli, Mohd Nasir, Dr.; Rosline, Hassan; Hakimah, Mahsin; H., Adilah (Springer-Verlag, 2008-06)
      Image processing technique involved five basic components which are image acquisition, image preprocessing, image segmentation, image post-processing and image analysis. The most critical step in image processing is the ...
    • The Characterization of Bario Rice Starch-nanoHA Scaffolds using SEM and Dielectric Measurement 

      M.Riza, Roslan; Nashrul Fazli, Mohd Nasir; M.F., Abdul Khalid; Nasrul Amri, Mohd Amin; N. Mohammad; Beh Chong, You; Cheng Ee, Meng; Mohd Shukry, Abdul Majid (IOP Publishing, 2019)
      Bone tissue scaffold had been ventured for over the decades as a solution for bone failure and trauma. Starch is the most common natural polymer that has been used as a biomaterials and a good candidate for scaffold ...
    • Characterization of Chitosan-poly (ethylene oxide) blends as haemodialysis membrane 

      Nashrul Fazli, Mohd Nasir, Dr.; Norita, Mohd Zain; Raha, Mat Ghazali; Nahrizul Adib, Kadri (Science Publications, 2005)
      Blend membranes of chitosan and poly (ethylene oxide) with different molecular weights of 100,000 and 600,000 were prepared by the solution cast technique. The Chitosan-PEO blend membranes were produced to study their water ...
    • A complete system modelling of piezoelectric energy harvester (PEH) with silicon carbide (SiC) used as cantilever base 

      Mohd Noor Fakhzan, Mohd Kazim; Raman, Selvanayakan; Muhammad Hafiz, Shafie; Nashrul Fazli, Mohd Nasir, Dr.; Asan Gani, Abdul Muthalif, Dr. (Penerbit UTM Press, 2014)
      Silicon carbide (SiC) is a material that possesses hardness and robustness to operate under high temperature condition. This work is a pilot in exploring the feasibility of cubic piezo element on the SiC wafer with integrated ...
    • Development of a mobile patient data management system using ASP .Net 

      Nahrizul Adib Kadri; Mohd Hanafi, Mat Som; Raha, Mat Ghazali; Nashrul Fazli, Mohd Nasir, Dr. (Springer-Verlag, 2007)
      The primary aim of this study is to look into the feasibility of developing a mobile patient data management system using ASP .Net technology. It was envisioned that medical personnel, by using any WAP-enabled devices, ...
    • Development of an ambient lighting monitoring system for radiological image viewing application 

      Azlan, Che Ahmad; Ng, Kwan Hoong, Prof. Dr.; Nashrul Fazli, Mohd Nasir, Dr.; Nahrizul Adib, Kadri (Springer-Verlag, 2007)
      Ambient lighting plays a very important role in radiological image viewing environment. Excessive room ambient lighting (or illuminance) degrades image contrast, introducing veiling glare, diffuse reflectivity on the viewing ...
    • Development of web-based medical history compiler 

      Nashrul Fazli, Mohd Nasir, Dr.; Nahrizul Adib, Kadri; Raha, Mat Ghazali; Azlan, Che Ahmad (Springer-Verlag, 2007)
      The medical industry is moving towards ‘personalized medicine’ in all aspects of healthcare services, due to the realisation that each human body is different and ideally requires particular combination of drugs and ...
    • Fabrication of 3C-silicon carbide membranes: Towards development of novel microdevices for biomedical applications 

      Nashrul Fazli, Mohd Nasir; Charan, M. Shah; Leech, Patrick William; Reeves, Geoffrey K.; Pirogova, Elena; Istivan, Taghrid S; Tanner, Philip G.; Holland, Anthony Stephen (Institute of Electrical and Electronics Engineers (IEEE), 2012-02-27)
      3C-SiC is currently under intense study as a potential material for implantable low power blood pressure sensing due to its biocompatibility. In this work, we present and discuss the fabrication processes for n-type 3C-SiC ...
    • Four point probe geometry modified correction factor for determining resistivity 

      Algahtani, Fahid; Thulasiram, Karthikram B.; Nashrul Fazli, Mohd Nasir, Dr.; Holland, Anthony Stephen (The International Society for Optical Engineering (SPIE), 2013-12-09)
      The four-point probe technique is well known for its use in determining sheet resistance and resistivity (or effective resistivity) of thin films. Using a standard four-point probe setup, relatively large area samples are ...
    • Image enhancement techniques using local, global, bright, dark and partial contrast stretching for acute leukemia images 

      N.R.Mokhtar; Nor Hazlyna, Harun; Mohd Yusoff, Mashor, Prof. Dr.; H.Roseline; Nazahah, Mustafa; R., Adollah; H., Adilah; Nashrul Fazli, Mohd Nasir, Dr. (International Association of Engineers, 2009-07)
      Leukaemia is a malignant disease (cancer) that affects people in any age either they are children or adults over 50 years old. Nowadays, there are screening system guidelines for leukaemia patients. The screening result ...
    • Improvement of Glucose Oxidase Immobilization using Sol-Gel technique 

      Nashrul Fazli, Mohd Nasir; Yang, Y. (Universiti Malaysia Perlis, 2007)
      A sol gel based needle type biosensor using 3-glycidoxypropyl dimethylethoxy silane, as silane agent was developed to improve the immobilisation efficiency of glucose oxidase (GOD). The glucose sensor was coated with ...
    • Malaysia and telecare — a preliminary study 

      Megat Syahirul Amin, Megat Ali; Aisyah Hartini, Jahidin; Nashrul Fazli, Mohd Nasir, Dr.; Saidatul, A.; Zulkarnay, Zakaria; Ahmad Faizal, Salleh, Dr.; Nazahah, Mustafa (Springer Berlin Heidelberg, 2008)
      Advancements in nutrition, sanitation, health practices and medical care has significantly reduced infant mortality rate improved the life expectancy of the population. With the increasing ageing population and chronic ...
    • Measuring blood pressure using a photoplethysmography approach 

      Muhamad Khairul, Ali Hassan; Mohd Yusoff, Mashor, Prof. Dr.; Nashrul Fazli, Mohd Nasir, Dr.; Shakir H., Mohamed (Springer-Verlag, 2008-06)
      Blood pressure is often measured using a device called a sphygmomanometer, a stethoscope, and a blood pressure cuff. All the existing manual or automatic measuring techniques of blood pressure are based on this principle, ...
    • Measuring of systolic blood pressure based on heart rate 

      Muhamad Khairul, Ali Hassan; Mohd Yusoff, Mashor, Prof. Dr.; Nashrul Fazli, Mohd Nasir, Dr.; Shakir H., Mohamed (Springer-Verlag, 2008-06)
      In this paper, we describe the method of noninvasive blood pressure (BP) measurement using electrocardiography (ECG) signal to measure arterial blood pressure. Here, we propose a continuous blood pressure monitoring method ...
    • The Optimization of the Hydroxyapatite (HA) Material Characteristics Produced from Corbiculacea (Etok) Shells 

      Mohd Riza, Roslan; Nashrul Fazli, Mohd Nasir; Mohd Farid, Abdul Khalid; Nur Farahiyah, Mohammad; Cheng Ee, Meng; Nor Nabielah Nazihah, Hashim; Beh Chong, You; Mohd Shukry, Abd. Majid; Nasrul Amri, Mohd Amin (IOP Publishing, 2019)
      Hydroxyapatite commonly used in medical field for tissue disease, bone disease, drug delivery and also for non-medical field purpose such as wastewater treatment. Due to excellent biocompatibility and bioactive properties, ...
    • Prolonging glucose sensor's performance in In Vivo environment 

      Nashrul Fazli, Mohd Nasir, Dr.; Yang Ying (Faculty of Computer Science & Information Technology, University of Malaya, 2006)
      In this paper, a sol gel based needle type biosensor using 3-glycidoxypropyl dimethylethoxy silane, as silane agent was developed to improve the immobilization efficiency of glucose oxidase (GOD). The glucose sensor was ...
    • Properties of Al and Pd contacts on n-type SiC membranes 

      Nashrul Fazli, Mohd Nasir, Dr.; Leech, Patrick William; Holland, Anthony Stephen; Reeves, Geoffrey K.; Tanner, Philip G. (Materials Research Society, 2012-04)
      Membranes with dimensions up to 10 mm x 15 mm have been fabricated in epitaxial 3C-SiC/Si wafers. An array of CTLM metal contacts was deposited onto the upper surface of the n-SiC membrane. Both Al/n-SiC and Pd/n-SiC ...
    • A quantitative study of post-biopsy radiofrequency cauterization 

      Azlan, Che Azlan; Nashrul Fazli, Mohd Nasir, Dr.; Nahrizul Adib, Kadri; Ahmad Saifizul, Abdullah, Dr.; Ng, Kwan Hoong, Prof. Dr. (Springer-Verlag, 2007)
      Percutaneous image-guided needle biopsy is typically performed in highly vascular organs or in tumors with rich macroscopic and microscopic blood supply. The main risks related to this procedure are bleeding and implantation ...