Search
Now showing items 1-6 of 6
Strength and fracture characteristics of shear adhesive dissimilar joint
(Universiti Malaysia Perlis (UniMAP), 2012-02-27)
In this study, the effect of bond thickness upon the
shear strength of epoxy adhesively bonded joint with dissimilar
adherends is addressed. The bond thickness, t between the
adherends is controlled to be ranged from ...
Study on strength of V-shaped epoxy adhesive joint
(Universiti Malaysia Perlis (UniMAP), 2012-02-27)
This paper deals with strength and failure prediction
of V-shaped epoxy adhesive joint. The effect of scarf angle and
bond thickness upon the joint strength is investigated by tensile
test. A simple failure criterion ...
Strength prediction and reliability of brittle epoxy adhesively bonded dissimilar joint
(Elsevier Ltd, 2013)
This paper deals with strength and failure prediction as well as reliability issues of adhesive joints of brittle epoxy bonding of two dissimilar adherends. Effects of bond thickness and scarf angle upon the strength of ...
Strength of three-point-bending ductile adhesive joint with dissimilar adherent
(Trans Tech Publications, 2014-06)
In this study, an experimental investigation was conducted in order to determine the effect of different adhesive thickness (i.e., 0.1, 0.5, 0.7 and 1 mm) on strength of ductile adhesive joint. The study scope covers both ...
Strength of ductile adhesive butt joint bonded with dissimilar adherents: effect of surface roughness
(Trans Tech Publications, 2014-06)
The purpose of this project is to study the influence of the macroscopic state of surface
roughness of the dissimilar adherent on the strength of adhesive joint. In this project, several types of sandpaper were used to ...
Strength prediction of epoxy adhesively bonded scarf joints of dissimilar adherends
(Elsevier Ltd, 2011-09)
In this study, strength of epoxy adhesively bonded scarf joints of dissimilar adherends, namely SUS304 stainless steel and YH75 aluminum alloy is examined on several scarf angles and various bond thicknesses under uniaxial ...