| dc.contributor.author | Ahmad Humaizi, Hilmi | |
| dc.contributor.author | Norazman, M. Nor, Lt. Kol. Ir. Dr. | |
| dc.contributor.author | Ariffin, Ismail | |
| dc.contributor.author | Mohammed Alias, Yusof | |
| dc.contributor.author | Ahmad Mujahid, Ahmad Zaidi | |
| dc.contributor.author | Shohaimi, Abdullah, Brig. Jen. Prof. Madya Dr. | |
| dc.date.accessioned | 2013-10-21T04:20:49Z | |
| dc.date.available | 2013-10-21T04:20:49Z | |
| dc.date.issued | 2012-06-18 | |
| dc.identifier.citation | p. 728 - 732 | en_US |
| dc.identifier.isbn | 978-967-5760-11-2 | |
| dc.identifier.uri | http://dspace.unimap.edu.my/123456789/29002 | |
| dc.description | The 2nd International Malaysia-Ireland Joint Symposium on Engineering, Science and Business 2012 (IMiEJS2012) jointly organized by Universiti Malaysia Perlis and Athlone Institute of Technology in collaboration with The Ministry of Higher Education (MOHE) Malaysia, Education Malaysia and Malaysia Postgraduates Student Association Ireland (MyPSI), 18th - 19th June 2012 at Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia. | en_US |
| dc.description.abstract | Water is able to cut certain thickness of metal plates if given enough pressure. To prove it, a blast test jig is design and fabricated. The design of the blast test jig is optimized using AUTODYN blast simulation software. The blast test jig consists of three parts that is blast cap, water container and workpiece holder. 10 grams of PE4 explosive was used in the experiment. The PE4 explosive was exploded inside a hollow chamber inside the blast cap. The blast wave pushes the water to cut 5 mm thick Aluminum plate and 2 mm thick stainless steel plate. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
| dc.relation.ispartofseries | Proceedings of the The 2nd International Malaysia-Ireland Joint Symposium on Engineering, Science and Business 2012 (IMiEJS2012); | |
| dc.subject | AUTODYN | en_US |
| dc.subject | PE4 | en_US |
| dc.subject | Explosion | en_US |
| dc.subject | Rectangular nozzle | en_US |
| dc.subject | Water | en_US |
| dc.title | Design and fabrication of blast test jig for experiment to push water through a rectangular nozzle using explosion | en_US |
| dc.type | Working Paper | en_US |
| dc.contributor.url | humaizi@unimap.edu.my | en_US |
| dc.contributor.url | azman@upnm.edu.my | en_US |
| dc.contributor.url | ariffin@upnm.edu.my | en_US |
| dc.contributor.url | alias@upnm.edu.my | en_US |
| dc.contributor.url | mujahid@upnm.edu.my | en_US |
| dc.contributor.url | shohaimi@upnm.edu.my | en_US |
