Search
Now showing items 1-7 of 7
Studies on physical properties of nanocrystalline Cu₂S thin fims prepared by modified chemical bath deposition methos (M-CBD)
(Universiti Malaysia Perlis, 2013)
Nanocrystalline Copper sulphide thin films evoked much attention due to their vast potential in various fields. The Cu₂S thin films have wide range of well perspective applications such as photovoltaic cells, tubular solar ...
Effect Irradiation time of Gamma Ray on MSISM (Au/SnO₂/SiO₂/Si/Al) devices using theoretical modeling
(Universiti Malaysia Perlis, 2015)
An experimental and theoretical analysis of the effect of irradiation time to Gamma ray on the SnO₂/n-Si hetero-junction devices have been carried out. The time of exposure to Gamma ray was taken as (t= 0, 50, 100, and 150 ...
Comparsion of the physical properties for Cds and Cds doved PVA thin prepared by spray pyrolysis
(Universiti Malaysia Perlis, 2013)
Cadmium sulphide (CdS) and CdS doped with PVA semiconductor thin films were prepared by chemical pyrolysis technique. The thickness of the films was varied in the range (1.281, 1.367, 1.421, 1.485) μm and (1.722, 1.776, ...
Effect of annealing temperature on the optical and electrical properties of Mg doped TiO₂ thin films
(Universiti Malaysia Perlis (UniMAP), 2017)
In order to achieve high conductivity and transmittance of transparent conducting
oxide (TCO), we attempted to fabricate Mg doped TiO₂ (Mg0.01Ti0.99O2) thin films and
characterized them for their structural and optical ...
Influence of annealing temperature on some properties of TiO2/Au thin films prepared by rf and dc magnetron sputtering methods
(Universiti Malaysia Perlis (UniMAP), 2022-01)
This paper uses RF and DC magnetron sputtering techniques to prepare TiO2/Au thin film on glass substrates. TiO2thin film was deposited under a power of 150 Watt for 90 min. by RF magnetron sputtering technique and achieved ...
Meso-porous-like tungsten oxide structure: a study on some physical properties at different deposited temperatures
(Universiti Malaysia Perlis (UniMAP), 2022-10)
Polycrystalline tungsten oxide (WO3) thin films were prepared using the spray pyrolysis method at various substrate temperatures (200, 250, 300, 350, and 400 °C) on the quartz substrate. The X-ray diffraction pattern showed ...
Preparation and characterization of nanostructured ITO Thin Films by Spray Pyrolysis Technique: Dependence on annealing temperature
(Universiti Malaysia Perlis (UniMAP), 2023-01)
Transparent conducting oxides (TCOs) like Indium tin oxide (ITO) have wide attention from
all scientists which have low resistance and high visible light transmittance, used as
transparent electrodes in many optoelectronic ...