Search
Now showing items 1-10 of 19
The effect of sintering on the properties of powder metallurgy (PM) F-75 alloy
(Trans Tech Publications, 2013)
F-75 (Co-Cr-Mo) alloy are widely used in the production of medical implants because of their excellent strength properties, hardness and also one of the biocompatible materials that very suitable in human body environment. ...
Self-compacting high density tungsten-bronze composites
(Elsevier, 2013-07)
Green compacts of W–bronze were encapsulated in shells of bronze powder, placed in a ceramic mold and sintered in alumina tube furnace at 1150 °C. Throughout the sintering cooling stage the differential coefficient of ...
Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite
(Trans Tech Publications (TTP), 2013)
A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...
Characterization of porous aluminum fabricated via sintering- dissolution process (SDP)
(Trans Tech Publications, 2013)
Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...
Fabrication and characterization of porous F-75 for potential application in tissue engineering
(Trans Tech Publications, 2013)
Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...
The outcome of sintering parameters study toward the thermal properties of CuSiC composite
(Trans Tech Publications, 2014)
Miniaturisation of electronic chips which have increasing functionality within the same package size has induced significant increases in requirements for extraction of heat from the integrated circuit (IC). Packaging ...
Effect of sintering on the physical and mechanical properties of Co-Cr-Mo (F-75)/HAP composites
(Universiti Kebangsaan Malaysia, 2013-12)
This paper reports on the effects of HAP addition and sintering temperature on the microstructure and properties of the F-75/HAP composites fabricated by powder metallurgy. Co-Cr-Mo (F-75) is used in orthopedics because ...
Sintering behavior and microstructure evolution of mechanically alloyed W–bronze composite powders by two-step ball milling process
(Elsevier, 2013-01)
The miscibility of W in Sn and Cu is extremely poor. Sintering of W–bronze composites to their full density is proved to be difficult. To tackle this problem, the ball milling process of the W–bronze powder mixture proposed ...
Effect of space holder and compaction pressure on the porosity of sintered copper
(Trans Tech Publications, 2013)
The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...
Influence of sintering temperature on the properties of pulsed electric current sintered hybrid coreshell powders
(Elsevier, 2013-10)
The influence of pulsed electric current sintering (PECS) temperature on the properties of bulk materials consolidated from three different types of hybrid powders have been studied. These powders consisted of iron ...