Search
Now showing items 1-10 of 19
The corrosion studies of powder metallurgy Co-Cr-Mo (F-75) alloy
(AENSI Publisher All rights reserved, 2013-10)
Co-Cr-Mo (F-75) alloy was investigated for biomedical application due to its mechanical properties and good corrosion resistance. This study has been focusing on the corrosion behavior of PM Co-Cr-Mo alloy. The Co-Cr-Mo ...
Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication
(Trans Tech Publications, 2013)
The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ...
The effect of sintering on the properties of powder metallurgy (PM) F-75 alloy
(Trans Tech Publications, 2013)
F-75 (Co-Cr-Mo) alloy are widely used in the production of medical implants because of their excellent strength properties, hardness and also one of the biocompatible materials that very suitable in human body environment. ...
Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution
(Technical University of Košice, 2014)
Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ...
Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite
(Trans Tech Publications (TTP), 2013)
A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...
Mixing optimization of Sn-Cu-Si₃N₄ via powder metallurgy route for composite solder fabrication
(Trans Tech Publications, 2014)
The aim of this study was to optimize the mixing process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si₃N₄ were carefully weighted, ...
Effect of beta tricalcium phosphate (β-TCP) on properties of Mg-Zn composites
(Trans Tech Publications, 2014)
In this work, Mg and Zn powder were used to prepare the Mg-Zn/β-TCP composites with different β-TCP composition by using powder metallurgy technique. The composite were mixed using ball mill and compacted at 500 MPa. The ...
Microstructure evolution of Sn-3.5Ag-1.0Cu-0.5Ni/Cu system lead free solder under long term thermal aging
(Scientific.Net, 2012-12)
Due to environmental concerns, lead-free solders were introduced in replacing the lead-based solders in microelectronics devices technology. Although there are many lead-free solder available, the Sn-Ag-Cu solder was ...
Research advances of composite solder material fabricated via powder metallurgy route
(Scientific.Net/Trans Tech Publications, 2012-12)
Researches and studies on composite solder have been done by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders as lead is considered as toxic. Solder ...
Fabrication and characterization of porous F-75 for potential application in tissue engineering
(Trans Tech Publications, 2013)
Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...