Search
Now showing items 1-5 of 5
Effect of Compatibilizer on Mechanical Properties and Morphology of Clay Filled Low Density Polyethylene (LDPE) Composites
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)
The main purpose of incorporating fillers, such as clay into composites of polyolefin is to decrease costs and change the properties. Structural differences between both components give rise to the formation of large filler ...
The effect of compatibilizer on tensile properties, swelling behaviour and morphology of Calcium Carbonate filled Polypropylene/Ethylene Propylene Diene Terpolymer composites
(Universiti Kuala Lumpur (UniKL), 2007-11-27)
Calcium carbonate (CaCO3) was used as filler in the polypropylene (PP)/ ethylene propylene diene terpolymer (EPDM) composites in order to decrease cost and change the properties. The composites were prepared by using a ...
The influence of variation milling time into mechanical properties for 5% SiC reinforced P/M 5082 develop by using Powder Metallurgy technique
(Universiti Malaysia Perlis, 2009-12-01)
The importance of Al and SiC composite materials are recognized due to a low production cost and as material with vast availability on earth. Composite materials were developed as an alternative material with give a high ...
The effect of particulate reinforcement addition to latent heat and solid fraction During Solidification Metal Matrix composite produced by permanent casting
(Universiti Malaysia Perlis, 2009-12-01)
In this study the effect of particulate reinforcement to latent heat generation and solid fraction during solidification of metal matrix composite is investigated. Permanent casting using copper mould is employed for ...
The effect of Maleic Anhydride Grafted Polypropylene on Thermo-Oxidative ageing of paper sludge filled Polypropylene/Ethylene Propylene Diene terpolymer composites
(Universiti Kuala Lumpur (UniKL), 2007-11-27)
Paper sludge filled polypropylene (PP)/ethylene propylene diene terpolymer (EPDM) composites were developed in this study. The paper sludge was used as filler in PP/EPDM blends and maleic anhydride-grafted polypropylene ...