Search
Now showing items 1-10 of 143
Batik wastewater treatment by nanoparticle Titanium Dioxide, TiO2
(Universiti Malaysia Pahang, 2009-06-20)
Liquid waste containing
chemical material was produced by batik
industry as a result of their laundrying
process. One of the chemical in batik
wastewater is fabric dye. Titanium
dioxide (TiO2) has potential application
for ...
Finite element modeling, analysis and fatigue life prediction of lower suspension arm
(Universiti Malaysia Pahang, 2009-06-20)
This paper explores the finite element
modeling, analysis and fatigue life prediction of
lower suspension arm using the strain-life
approach. Aluminum alloys are selected as a
suspension arm materials. The structural ...
Characterization and development of horticulture greenroom
(Universiti Malaysia Pahang, 2009-06-20)
Plantation of horticulture crop in
Malaysia is growing restricted locally at the
highland. This is due to the climate necessary of
horticulture crop. Thus, plantation of those crops in
the lowland tropic is a difficult ...
Prediction of car ground clearance
(Universiti Malaysia Pahang (UMP), 2009-06-20)
In layout drawing, one of the basic
components that it must have is the estimation of
ground lines that will enable engineers to measure
the clearance of car components especially the
lower part to ground. This paper ...
Designing a weight management application using a mobile device for Malaysian
(Universiti Malaysia Pahang (UMP), 2009-06-20)
Based on Weight Management Information Center (WMIC) of Malaysia, about 26.5% of the Malaysian populations are overweight while 25% are underweight. Both overweight and underweight will increase the risk of illness. Weight ...
Calibration of SWMM5 for local parameters at Sungai Kayu Ara, Damansara Selangor
(Universiti Malaysia Pahang, 2009-06-20)
Urban storm water modeling is one of
the alternatives management and design tools in
water engineering field. Users have so many
choices in selecting the appropriate model base on
their application purposes. One of the ...
Comparison of product data model between Rapid Prototyping and CNC milling 3-axis
(Universiti Malaysia Pahang, 2009-06-20)
Nowadays, there are high demands
on products with high accuracy and quality, this is
due to the development of new technology on
machinery and computer software. This research
has been done to compare the product data ...
Investigation of single and double action mechanical deflection cloth washing process
(Universiti Malaysia Pahang, 2009-06-20)
Many types of washing approaches have been
introduced in laundry industry. They generally use rotating
drum and rotary actuator installed at the bottom washing
drum to generate rotating effect during washing process. ...
Foamed aggregate pervious concrete – An option for road on peat
(Universiti Malaysia Pahang, 2009-06-20)
Foamed aggregate is a novel
controlled density material developed for road
construction on peat. This paper reports recent
findings of the mix design and test method of
pervious concrete. The high porosity allows ...
An introduction to optical emission spectroscopy and laser-aided spectroscopy techniques for low-temperature plasma analyses
(Universiti Malaysia Pahang, 2009-06-20)
Low-temperature plasma is a tool
that has been used widely for surface modification
of materials from 70’s. Such as in the
microelectronic and semiconductors industries,
inductively coupled plasma and capacitively
coupled ...