dc.contributor.author | Banjuraizah, Johar | |
dc.contributor.author | N.A. Rejab | |
dc.contributor.author | N.K. Su | |
dc.contributor.author | M.S. Talib | |
dc.contributor.author | Azlin Fazlina, Osman | |
dc.contributor.author | Nur Maizatul Shima, Adzali | |
dc.contributor.author | Mohamad Hatta, Musa | |
dc.date.accessioned | 2008-08-11T06:56:17Z | |
dc.date.available | 2008-08-11T06:56:17Z | |
dc.date.issued | 2007-06-09 | |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/1531 | |
dc.description | Organized by Universiti Malaysia Perlis (UniMAP), 9th - 12th June 2007 at Park Royal Hotel, Penang. | en_US |
dc.description.abstract | Calcined dolomite is dolomite powder that had been calcined at high temperature. This paper describes the fabrication of aluminum metal matrix composite reinforced with calcined dolomite by powder metallurgy route. The effect of weight percent of reinforcement (10 wt%, 20 wt%, 30 wt%) on physical properties of Aluminum composites are studied and presented in this paper. Calcined dolomite was synthesis from dolomite powder at 1100°C for 4 hours. After weighed, mixed and blended in planetory
ball mill, the powders were compacted at 300 MPa and heated in tube furnace under nitrogen
environment at sintering temperature 610°C. After 7 hours heated in furnace, it was cooled in furnace until room temperature. The results of the study showed that, the hardness increased with the increment of
dolomo content. Study also showed that the density decreased upon increasing the calcined dolomite content. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.relation.ispartofseries | 1st International Conference on Sustainable Materials 2007 (ICoSM2007) | en_US |
dc.subject | Powder metallurgy | en_US |
dc.subject | Aluminum/calcined dolomite | en_US |
dc.subject | Aluminum dolomite | en_US |
dc.subject | Dolomite | en_US |
dc.subject | Macrohardness | en_US |
dc.subject | Density | en_US |
dc.subject | Aluminum matrix composite | en_US |
dc.subject | Calcined dolomite | en_US |
dc.subject | Composites | en_US |
dc.subject | Composite materials | en_US |
dc.title | Physical properties of Al/Calcined Dolomite Metal Matrix composite by Powder Metallurgy Route | en_US |
dc.title.alternative | 1st International Conference on Sustainable Materials 2007 (ICoSM2007) | en_US |
dc.type | Working Paper | en_US |