Show simple item record

dc.contributor.authorNor Ashbahani, Md. Kajaan
dc.contributor.authorIsmail, Daut, Prof. Dr.
dc.contributor.authorNasrul Helmei, Halim
dc.date.accessioned2011-10-23T14:30:46Z
dc.date.available2011-10-23T14:30:46Z
dc.date.issued2011-06-06
dc.identifier.citationp. 208-210en_US
dc.identifier.isbn978-1-4577-0354-6
dc.identifier.urihttp://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5970437
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/14817
dc.descriptionLink to publisher's homepage at http://www.ieeexplore.ieee.org/en_US
dc.description.abstractThis paper discussed result of an investigation towards the effect of using two different Cold Rolled Grain-Oriented (CRGO) Silicon Iron material to the 100kVA three phase distribution transformer. This experiment used M4 and M5 material with 5mm different overlap length, configured with yoke and limb arrangement. Power loss has been measured using no-load test with 15 layer of lamination. The power loss of the transformer model core of M4 material at the operation mode flux density, 1.5T is 0.976W/Kg. This shows that M4 material have lower overall power loss compare to M5 material where M5 material have 1.060W/Kg overall power loss during operation mode.en_US
dc.language.isoenen_US
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)en_US
dc.relation.ispartofseriesProceedings of the 5th International Power Engineering and Optimization Conference (PEOCO 2011)en_US
dc.subjectGrain-Oriented Silicon Ironen_US
dc.subjectM4 and M5 materialen_US
dc.subjectPower lossen_US
dc.subjectTransformer coreen_US
dc.titleMeasurement of overall power loss for different three phase 100kVA transformer core materialen_US
dc.typeWorking Paperen_US
dc.contributor.urlismail.daut@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record