Search
Now showing items 1-10 of 12
Design and fabrication of Nanowire-based conductance biosensor using spacer patterning technique
(Institute of Electrical and Electronics Engineering (IEEE), 2008-12-01)
Materials have different behaviours and properties at the nanoscales (1-100nm). New theories and discoveries have been found in designing and fabricating at these sizes. Silicon Nanowires has allowed the introduction of ...
Nanotechnology development in Malaysia: current status and implementation strategy
(Universiti Malaysia Perlis, 2008-12-05)
Nano-technology development needs all the support it could get to ensure the technology is being leveled up and benefits all mankind. Malaysia has started it own
micro-technology and nano-technology development since the ...
The effect of temperature, pH and exposure time to Electroless Nickel Deposition for Under Bump Metallurgy (UBM)
(Universiti Putra Malaysia (UPM), 2005-12-06)
The low cost deposition of under bump metallurgy (UBM) method presented in this paper is based on electroless nickel immersion gold (ENIG) bumping process. The study is focuses on the effect of temperature, pH and exposure ...
A new Microelectronic Engineering degree curriculum in KUKUM
(Association of Engineering Education in South East Asia and the Pacific, 2005-12-08)
This paper presents the development and implementation of a new curriculum at the Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM). The curriculum is specifically developed for the Bachelor of Engineering Degree program ...
SOI Single-Electron Transistors (SET) design and process development
(Kolej Universiti Kejuruteraan Utara Malaysia, 2005-05-18)
Single-electron transistor (SET) is attractive devices to use for large-scale integration. SET can be made very small,
dissipate little power, and can measure quantities of charge much faster than MOSFETs. This makes SET ...
Development of In-House MOS transistor at KUKUM Micro Fabrication Cleanroom: Microelectronic undergraduate activities
(Kolej Universiti Kejuruteraan Utara Malaysia, 2005-05-18)
This paper presents the module development of inhouse MOS transistor device at KUKUM Micro Fabrication Cleanroom. The process started with the establishment of process flow, process modules, and process parameters. Four ...
PMMA characterization and optimization for Nano Structure formation
(Kolej Universiti Kejuruteraan Utara Malaysia, 2005-05-18)
The limitations imposed on optical lithography by the wavelength of light have been overcome using electron lithography. Electron lithography offers high resolution
because of the small wavelength of the 10-50 keV electrons ...
Thermal aging study at 150 °C and 200 °C: Gold ball bonds to aluminum bond pad
(The Electrochemical Society, 2009-03-17)
This paper presents the study of the thermal aging of the gold ball bonds and aluminum bond pad at 150 °C and 200 °C for various interval times. Process decapsulation and Field Emission Scanning Electron Microscopy (FESEM) ...
Mask design and fabrication of LiSFET for light sensor application
(Institute of Electrical and Electronics Engineering (IEEE), 2008-12-01)
The usage of MOSFET is not limited as amplifier and switch only but it has great potential to become the sensors when sensing mediums which integrated on to MOSFET. This research is intended to study the combination of ...
Design and fabricate Mosfet Masks at KUKUM Microfabrication Cleanroom for teaching undergraduates
(Kolej Universiti Kejuruteraan Utara Malaysia, 2005-05-18)
In teaching undergraduates program in
MOSFET fabrication, mask set is one of the major problem since the cost is extensively high. The purpose of these masks is to define certain region on a wafer. In this work, a low ...