Browsing The Library by Subject "Fabrication"

Now showing items 1-7 of 7

    • Consolidation not happening fast enough 

      Risen, Jayaseelan (The Star, 2017-02-22)

    • Design and fabrication of coating-applicator 

      Mohd Zahid, A.; Cheow, C.S.; Norizzah, A.R.; Halimaton Zaharah, M.S.; Adi, M.S. (Universiti Malaysia Perlis, 2009-10-11)
      A machine called " coating -applicator" aimed to coat guava has been designed an fabricated. The designed of coatingapplicto was based on dipping of guavq for a short period in a blower and control unit were installed. ...

    • Low cost fabrication of micromixer and microchamber for microfluidic lab-on-chip 

      Uda, Hashim, Prof. Dr.; Tijjani Adam, Shuwa; M. Wesam, Al-Mufti; Ling, Peter Jie Lung; Shahrul Aizzam, Ariffin (Institute of Electrical and Electronic Engineers (IEEE), 2012)
      Microfluidic technology has been given the contribution in biomedical and chemistry. The testing and diagnosis on bio-reagents has the efficiency increased through the implementation of microfluidic technology, such as lab ...

    • Mask design for the reproducible fabrication and reliable pattern transfer for polysilicon nanowire 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Leow, Pei Ling (Institute of Electrical and Electronics Engineers (IEEE), 2012)
      In fabrication of Nanowire alignment and exposure are the most critical steps in photolithography process, the resolution requirements and precise alignment are vital, each mask needs to be precisely aligned with original ...

    • Physical properties of FG HAP-F75 fabricated by powder metallurgy 

      Noorazimah, Mohd Ab Llah; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Functional graded (FG) HAP-F75 was prepared by powder metallurgy technique. Three layers of functional graded HAP-F75 was fabricated using single punch hydraulic press. The fabrication technique consists of mixing, pressing ...

    • Silicon implementation of micro pressure sensor 

      Yufridin, Wahab; Zayegh, Aladin; Begg, Rezaul (Institute of Electrical and Electronics Engineers (IEEE), 2010-04-12)
      Pressure sensing is one of the mostly performed measurement encompassing varieties of applications. The latest technology such as silicon based Micro-electromechanical Systems (MEMS) technology is favoured due to its ...

    • Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants 

      Shah Fenner Khan, Mohamad Khan; Dalgarno, Kenneth W.; German, Matthew J. (Taylor & Francis Group, London., 2011-09-28)
      Rectification of defective bone structures due to trauma or deformation has benefited from the introduction of mostly rigid metal prostheses. However, the high stiffness of metal implants can cause stress shielding in bone ...