| dc.contributor.author | Shamsul Baharin Jamaludin, Assoc. Prof. Dr. | |
| dc.contributor.author | Noor Ashiqin A.R. | |
| dc.contributor.author | Shaiful Rizam Shamsudin | |
| dc.contributor.author | Mohd Fitri Mohamad Wahid | |
| dc.contributor.author | Azmi Kamardin | |
| dc.date.accessioned | 2008-05-21T06:50:49Z | |
| dc.date.available | 2008-05-21T06:50:49Z | |
| dc.date.issued | 2007-06-09 | |
| dc.identifier.uri | http://dspace.unimap.edu.my/123456789/1182 | |
| dc.description | Organized by Universiti Malaysia Perlis (UniMAP), 9th - 12th June 2007 at Park Royal Hotel, Penang. | en_US |
| dc.description.abstract | The aim of this study is to develop Al – 10 wt % SiCp composite by powder metallurgy technique. Aluminium and SiC powder were mixed by ball milling and it was then sintered at 550° C for 5 hours. The parameter to control the microstructure of the composite is milling time.Microstructure and hardness of the composites were investigated. The results showed that hardness of the composite has increased as
the milling time increased. The maximum value of hardness can be obtained at 5 hours milling time. After 5 hours milling time, the hardness starts to drop. Microstructure plays important role in controlling the
hardness of the composite. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
| dc.relation.ispartofseries | 1st International Conference on Sustainable Materials 2007 (ICoSM2007) | en_US |
| dc.subject | Aluminium silicon carbide | en_US |
| dc.subject | Silicon | en_US |
| dc.subject | Aluminum composites | en_US |
| dc.subject | Aluminum alloys -- Metallurgy | en_US |
| dc.subject | Powder metallurgy | en_US |
| dc.subject | Aluminum -- Mechanical properties | en_US |
| dc.subject | Milling time effect | en_US |
| dc.title | The Effect of Milling Time on Microstrucutre and Hardness of the Aluminium Silicon Carbide (Al-10 wt % SiCp) Composite | en_US |
| dc.title.alternative | 1st International Conference on Sustainable Materials 2007 (ICoSM2007) | en_US |
| dc.type | Working Paper | en_US |
