Search
Now showing items 1-8 of 8
Comparison on losses and flux distribution between two of 3 phase distribution transformer core 3000 kVA assembled with different angle of T-Joint
(Malaysia - Japan University Center (MJUC), 2007-11-15)
Thia paper describes the results of an investigation on the effect of the use of different angle of T-Joint in two models of 3 phase distribution transformer with capacity of 3000 kVA. The first model uses 3 phase distribution ...
Comparison of losses and flux distribution in 3 phase 100 kVA distribution transformers assembled from various type of T-Joint geometry
(Science Publications, 2006)
This paper describes results of an investigation of the variation of power loss, building factor, flux leakage and flux distribution in 3-phase model transformer cores assembled from various type of T-joint geometry. The ...
Comparison on losses and flux distribution among the three of 3 phase distribution transformer 1000kVA assembled from various amount of layer of transformer core lamination
(Universiti Kuala Lumpur (UniKL), 2007-12-13)
This paper describes the results of an investigation on the effect of different amount of layer of core lamination in three of 3 phase distribution transformers 1000kVA. The investigation involves the varian of power loss, ...
Comparison on losses and flux distribution among three 3-phase distribution transformers 1000kVA assembled from various amount of layers per stack of transformers core lamination
(Universiti Kuala Lumpur (UniKL), 2007-12-13)
This paper describes the results of an investigarion on the effect of different amount of layers per stack of core lamination in the three of 3 phase distribution transformers 1000kVA. The investigation involves the variant ...
Utility specification for distribution transformers in Malaysia
(Universiti Sains Malaysia (USM), 2005-07-22)
Optimum design of distribution transformer is desirable by all utilities as they contribute quite a large portion of the investment in an electrical distribution network system. Utility investigation of the specification ...
Transformer manufacturers in Malaysia: perspective in manufacturing and performance status
(Kolej Universiti Kejuruteraan Utara Malaysia, 2006-06-15)
Transformer is a static equipment which used electromagnetic induction to transfer electrical energy from one circuit to another. It is considered as one of the critical and important equipment in power industry. This ...
Contribution factors to transformer failure under no load condition and mitigation action
(Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO), 2006-12-20)
The study on transformer failure was carried out on commercial 1500 kVA 33/11 kV in TNB network distribution systems. The damage experienced by the transformer under study was suspected due to the transient surge overvoltage ...
11 kVA Substation design and commissioning
(Universiti Malaysia Perlis, 2008-05)
This report will explain about the final year project title as “ Designing and Commisioning the 11kV Electrical Substation”. In the part of designing this electrical substation, it need to localize and installation a several ...