Browsing Ismail Daut, Prof. Dr. by Author "Gomesh Nair, Shasidharan"

Now showing items 1-18 of 18

    • Clear sky global solar irradiance on tilt angles of photovoltaic module in Perlis, Northern Malaysia 

      Ismail, Daut, Prof. Dr.; Muhammad Irwanto; Mohd Irwan, Yusoff; Gomesh Nair, Shasidharan; Noor Syafawati, Ahmad (Institute of Electrical and Electronics Engineers (IEEE), 2011-06-21)
      The performance of a photovoltaic (PV) is highly influenced by its orientation and its tilt angle with the horizontal, due to the fact that both the orientation and tilt angle change the amount of solar radiation reaching ...

    • Combination of Hargreaves method and linear regression as a new method to estimate solar radiation in Perlis, Northern Malaysia 

      Ismail, Daut, Prof. Dr.; Muhammad Irwanto; Mohd Irwan, Yusoff; Gomesh Nair, Shasidharan; Noor Syafawati, Ahmad (Elsevier Ltd., 2011-11)
      The best way to obtain the solar radiation data of a particular place of interest (POI) is to measure at the specific site continuously and accurately over the long term. However, due to financial, maintenance, calibration ...

    • Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation 

      Ismail, Daut, Prof. Dr.; Anayet, Karim; Gomesh Nair, Shasidharan; Asri, M.; Mohd Irwan, Yusoff (Institute of Electrical and Electronics Engineering (IEEE), 2009-12-28)
      It is generally assumed that copper rotor bars can outstand aluminium rotor bars in terms of better performance in losses reduction or money saving. This paper presents the comparison of the aluminium rotor bar and copper ...

    • Core loss measurements of three phase AC induction motor 

      Ismail, Daut, Prof. Dr.; Anayet, Karim; Gomesh Nair, Shasidharan; Asri, N.; Syatirah; Muzhar, M. (Institute of Electrical and Electronics Engineers (IEEE), 2010-06-23)
      Core loss measurements at the field level for AC induction motor have been described. The standard requirements is the conventional no-load test to measure the “rotational losses” (sum of the core, friction & windage losses) ...

    • Energy Saving Through Development of New Copper Rotor of Induction Motor 

      Ismail, Daut, Prof. Dr.; Anayet, Karim; Gomesh Nair, Shasidharan; Syatirah, Mohd Noor; Mohd Asri, Jusoh; Mohd Muzhar, Ahmad Tajuddin (Malaysian Invention & Design Society (MINDS), 2010-05-14)
      This product describes the importance of induction motors is aimed at contributing to energy saving efforts. To investigate induction motor efficiency and loss parameters using new copper rotors. New copper rotors are ...

    • Fabrication and investigation of copper rotor bar on 0.5HP induction Motor-A performance and economical study 

      Ismail, Daut, Prof. Dr.; Gomesh Nair, Shasidharan; Yanawati, Yahya; Nor Shafiqin, Shariffuddin; Muhammad Irwanto, Misrun; Mohd Irwan, Yusoff; Anayet, Karim (Australian Journal of Basic and Applied Sciences, 2011-05)
      The paper deals with the fabrication of copper rotor bars for 0.5HP induction motor and then comparing it with the existing aluminium rotor bars. From this experiment the rotors are compared in terms of efficiency increment ...

    • The impacts of stator materials on induction motor nameplate parameters for high performance 

      Ismail, Daut, Prof. Dr.; Mohd S Ezwan, Abdullah; Gomesh Nair, Shasidharan; Yanawati, Yahya; Nor Shafiqin, Shariffuddin; Pungut, Ibrahim (Institute of Electrical and Electronics Engineers (IEEE), 2010-12-13)
      Core materials and magnet wire sizes were analyzed in order to find out the impacts on nameplate for high performance motor. Stack length and back core iron depth of stator geometry design are the parameters involve in ...

    • The impacts of stator outside diameters on induction motor nameplates: Analysis by using a finite element 

      Ismail, Daut, Prof. Dr.; Mastika, Abdullah; Gomesh Nair, Shasidharan; Yanawati, Yahya; Nor Shafiqin, Shariffuddin; Pungut, Ibrahim (Institute of Electrical and Electronics Engineers (IEEE), 2010-12-13)
      Design stimulation by software is important in order to save money and time. This paper is using stimulation software, which is a finite element method, to analyze the stator outside diameter impact on rated current, horse ...

    • Improvement of induction machine performance using power factor correction 

      Ismail, Daut, Prof. Dr.; Mohd Irwan, Yusoff; Muhammad Irwanto; Safwati, Ibrahim; Gomesh Nair, Shasidharan; Ezzani, M.; Risnidar, Chan (Institute of Electrical and Electronics Engineers (IEEE), 2011-06-21)
      In this paper, a new approach to improve power factor (PF) and reduced total harmonic distortion (THDi) is generated by a single phase induction motor is proposed. By designing the necessary technique and methodology, the ...

    • In house construction of an induction motor rotor by using 0.35mm thickness of steel sheet for efficiency based investigation 

      Ismail, Daut, Prof. Dr.; Gomesh Nair, Shasidharan; Yanawati, Yahya; Muhammad Irwanto, Misrun; Nor Shafiqin, Shariffuddin (Trans Tech Publications, 2012)
      In this paper, an in house production of a 0.5hp induction motor's rotor is investigated. This investigation considers the induction motor's efficiency and losses dissipation as an important aspect to determine the rotors ...

    • Optimization of current total harmonic distortion on three-level transformerless photovoltaic inverter 

      Ismail, Daut, Prof. Dr.; Muhammad Irwanto; Mohd Irwan, Yusoff; Gomesh Nair, Shasidharan; Noor Syafawati, Ahmad (Elsevier Ltd., 2012)
      This paper presents a new topology of three-level transformerless photovoltaic (PV) inverter. It consists of three main circuits; they are a pulse driver circuit, a full bridge inverter circuit and a power factor correction ...

    • Parameter determination of 0.5 hp induction motor based on load factor test - A case study 

      Ismail, Daut, Prof. Dr.; Gomesh Nair, Shasidharan; Muhammad Irwanto; Yanawati, Y.; Nor Shafiqin, S.; Mohd Irwan, Yusoff (Institute of Electrical and Electronics Engineers (IEEE), 2011-06-21)
      The load can influence the efficiency of the induction motor. Even if the load has higher or less load factor, it can reduce the efficiency of an induction motor by several percentage. By knowing this, it is important that ...

    • Performace of wind turbine based on wind speed data and turbine tower height in Kangar, Northern Malaysia 

      Ismail, Daut, Prof. Dr.; Muhammad Irwanto, Misrun; Mohd Irwan, Yusoff; Gomesh Nair, Shasidharan; Noor Syafawati, Ahmad (Australian Journal of Basic and Applied Sciences, 2011-07)
      This paper presents an analysis of the wind speed characteristic in Kangar, Northern Malaysia. The Weibull distribution function is applied to analyze the wind speed characteristic and used to calculate the wind power ...

    • Potential of solar radiation and wind speed for photovoltaic and wind power hybrid generation in Perlis, Northern Malaysia 

      Ismail, Daut, Prof. Dr.; Muhammad Irwanto, Misrun; Mohd Irwan, Yusoff; Gomesh Nair, Shasidharan; Rosnazri, Ali; Noor Syafawati, Ahmad (Institute of Electrical and Electronics Engineers (IEEE), 2011-06-06)
      This paper presents analysis of the solar radiation and wind speed characteristics in Perlis, Northern Malaysia for the year of 2006. The characteristics consist of daily and annual mean solar radiation and wind speed. ...

    • Power losses on grain oriented and non-grain oriented materials using epstein test for electrical machine design 

      Ismail, Daut, Prof. Dr.; Anayet, Karim; Mohd Asri, Jusoh; Gomesh Nair, Shasidharan; Syatirah, Mohd Noor; Mohd Muzhar, Ahmad Tajuddin (ACTA Press, 2009-10-12)
      Modeling and definition of procedures leading to a good estimation of power losses in electrical machines from materials test data still is a challenge. The materials used in this experiment are grain oriented (GO) and ...

    • Predicting the localized flux distribution in three phase induction motor between different stator slot size 

      Ismail, Daut, Prof. Dr.; Dina Maizana, Maiz Ahmad, Dr.; Nor Shafiqin, Shariffuddin; Nasrul Helmei, Halim; Yanawati, Y.; Mohd Asri, Jusoh; Gomesh Nair, Shasidharan; Pungut, Ibrahim; Abdullah, M.; Syatirah, M. N. (Institute of Electrical and Electronics Engineers (IEEE), 2011-06-06)
      A three phase induction motor differences of stator slot size is investigated in terms of its localized flux distribution. The search coil induced voltage method is used to analyze the flux distribution in the stator core. ...

    • Relationship between the solar radiation and surface temperature in Perlis 

      Ismail, Daut, Prof. Dr.; Mohd Irwan, Yusoff; Safwati, Ibrahim; Muhammmad Irwanto; Gomesh Nair, Shasidharan (Trans Tech Publications, Switzerland., 2012-06)
      Statistical models for predicting the solar radiation have been developed. In any prediction of the solar radiation, an understanding of its characteristics is of fundamental importance. This study presents an investigation ...

    • Review of study to improve dye sensitized solar cells performance by TiO2 thickness and extract mangosteen pericarp as sensitized 

      Ismail, Daut, Prof. Dr.; Muhammad Fitra, Zambak; Muhammad Irwanto; Gomesh Nair, Shasidharan; Mohd Irwan, Yusoff (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      Based on the process and observation of this paper electrical energy conversion efficiency in dye sensitized solar cell performance is strongly influenced by the dye and the thickness Titaniuam dioxide. Both of these items ...