Browsing Zul Azhar Zahid Jamal, Dato' Prof. Dr. by Title

Now showing items 30-49 of 50

    • Nano patterning of cone dots and nano constrictions of negative e-beam resist for single electron transistor fabrication 

      Sutikno, Madnasri; Uda, Hashim; Zul Azhar, Zahid Jamal (Springer New York, 2007-12)
      We present an optimization of nano dot of negative tone e-beam resist which is a very important step in single electron transistor fabrication process. The optimum design of dot and nano constriction plays a significant ...

    • Nano-silver microcavity enhanced UV GaN light emitter 

      Naser Mahmoud, Ahmed; Zaliman, Sauli; Uda, Hashim; Zul Azhar, Zahid Jamal (Inderscience Enterprises Limited, 2009)
      We report results of measurements that help to clarify the role of silver in the reflection of UV emission light from GaN. A GaN as an active layer was sandwiched between two silver metal reflectors. GaN layer on sapphire ...

    • A new Microelectronic Engineering degree curriculum in KUKUM 

      Yufridin, Wahab; Ali Yeon, Md Shakaff; Zul Azhar, Zahid Jamal; Zuraidah, Mohd Zain; Reha, Abdul Razak; Uda, Hashim (Association of Engineering Education in South East Asia and the Pacific, 2005-12-08)
      This paper presents the development and implementation of a new curriculum at the Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM). The curriculum is specifically developed for the Bachelor of Engineering Degree program ...

    • Portable AEROHUB- UniMAP Fire Fighter 

      Kamaruddin, Hussin, Brig. Jen. Dato' Prof. Dr.; M. Nasir, Zainal Ariff, Prof.; Shamsul Baharin, Jamaludin, Assoc. Prof. Dr.; Khairul Nizar, Ismail, Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof. Dr.; Omar, Bahari (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      AEROHUBTM aerosol fire suppression system represents a dramatic advancement in fire protection over alternative Halon, CO2, dry chemical and Water system.

    • Preliminary Microstructure and Hardness Studies of A356/Stainless Steel Composite via Gravity Die Casting Technique 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin, Assoc. Prof. Dr.; Kamarudin Hussin, Kol. Prof. Dato’ Dr.; Shaiful Rizam Shamsudin; K. Ismail (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      The microstructure and hardness of A356/stainless steel composite via gravity die casting technique were evaluated. Both nearly completed bonding and incomplete bonding was seen at the stainless steel wire- A356 matrix ...

    • The Production of Lightweight Aggregate for New Construction Material 

      Khairul Nizar Ismail, Dr.; Kamarudin Hussin, Kol. Prof. Dato’ Dr. (Universiti Malaysia Perlis (UniMAP), 2007-06-09)

    • Quantum DOT Single Electron Transistor 

      Uda Hashim, Assoc. Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Sutikno Madnasri (School of Microelectronic Engineering, 2008-01-09)

    • Quantum Dot Single Electron Transistor Structure Formation Using E-Beam Lithography 

      Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Samsudi, Sakrani, Prof. Dr.; Sutikno, Madnarski (C. I. S. Network, 2007-05-18)
      To achieve room temperature operation of single electron transistor (SET). To form single dot chanted for electron transport in SET via the Coufomb Blockade Oscillation (CBO) phenomenon.

    • Quantum Dot Single Electron Transistor: Design and Fabrication 

      Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Samsudi, Sakrani, Prof. Dr.; Madnarski, Sutikno (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)
      To achieve room temperature operation of single electron transistor (SET). To form single dot chanted for electron transport in SET via the Coufomb Blockade Oscillation (CBO) phenomenon.

    • Si-quantum Dots (QD) and SiO2 tunnel barriers 

      Sutikno, Madnasri; Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr. (Universiti Malaysia Perlis (UniMAP)Pejabat Timbalan Naib Canselor (Penyelidikan dan Inovasi), 2008-07)
      Oxidation of Si for nanostructures on silicon-on-insulator (SOI) substrates is a key process in the fabrication of Si single electron transistor (SET). The most di cult aspect of the fabrication process is the formation ...

    • A simple oxidation technique for quantum dot dimension shrinkage and tunnel barriers generation 

      Madnarski Sutikno; Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr. (Elsevier B.V., 2007-05)
      The tunnel barriers generation and the quantum dot size shrinkage play a significant role in single-electron transistor (SET) fabrication. Because the numerically etch indicators were not found, the technical indicators, ...

    • Sistem K-Kedatangan di Kampus Teragih 

      Kamarudin Hussin; Nasrudin Abd. Shukor; Nor Shubaily Khamis; Mohd Noorulfakri Yaacob (Kolej Universiti Kejuruteraan Utara Malaysia, 2005)
      K-Kedatangan merupakan sistem yang digunakan untuk merekod kehadiran kakitangan di kampus KUKUM. Sistem ini menggunakan teknologi kad pintar yang menggabungkan dua sistem utama iaitu lUS-Staf dan NPower. Sistem K-Kedatangan ...

    • Synthesis and Characterization of Stabilized Zirconia Toughened Alumina (ZTA) Doped Niobium Pentoxide (Nb2O5) 

      Banjuraizah, Johar; Zul Azhar, Zahid Jamal; Ahmad, Z. A. (EDP Sciences, 2016)
      The main target of this research is to study the mechanical properties of the Nb2O5 doped with alumina-zirconia composites. Pellets form samples of ZTA (5YSZ) doped niobium pentoxide in varied amount of 0 wt%, 0.3 wt%, 0.5 ...

    • Synthesis of finite length multi level sequences for clutter rejection in radar 

      Siti Julia, Rosli; Farid, Ghani, Prof. Dr.; Alif Hasmani, Abd Ghani; R. Badlishah, Ahmad, Prof. Dr. (Institute of Electrical and Electronics Engineers (IEEE), 2012-07-24)
      In radar systems the very low side-lobes that can be achieved with amplitude and phase modulated pulse trains make their use particularly attractive in systems requiring a large dynamic range. Moreover, the excellent ...

    • A systematic dry etching process for profile control of quantum dots and nanoconstrictions 

      Madnarski, Sutikno; Uda, Hashim; Zul Azhar, Zahid Jamal (Elsevier B.V., 2007-08)
      In essence, quantum dot dimensions and others can be laterally and vertically defined by using either bottom up or top down methods respectively. In fabrication that uses top down method, etch process hold a chief role. ...

    • Techniques in Integrated Circuit (IC) failure analysis 

      Zul Azhar, Zahid Jamal, Assoc. Prof. Dr.; Sanna, Taking (ELectron Microscopy Society of Malaysia (EMSM), 2004-12-13)
      Failure analysis (FA) plays an important role in the development and manufacturing of integrated circuits. It provides necessary information for technology advancement and for corrective action to improve quality ...

    • Temperature cycling analysis for ball grid array package using finite element analysis 

      Muhammad Nubli, Zulkifli; Zul Azhar, Zahid Jamal, Prof. Dr.; Ghulam, Abdul Quadir (Emerald Group Publishing Limited, 2011)
      Purpose – The purpose of this paper is to discuss the capability of finite element analysis (FEA) in performing the virtual thermal cycling reliability test to evaluate the reliability of solder joints in a ball grid array ...

    • An Undergraduate Micro Fabrication Course at the Northern Malaysia University College of Engineering 

      Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr. (Kolej Universiti Kejuruteraan Utara Malaysia, 2004)
      This paper presents the development of a new course conducted by the School of Microelectronic Engineering at the Northern Malaysia University College of Engineering or Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM) ...

    • Understanding the small world: an insight into the application of transmission electron microscopy in characterizing epitaxial layers 

      Zul Azhar, Zahid Jamal, Prof. Dr. (Penerbit Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2010-04)
      Transmission electron microscopy (TEM) is an unrivalled technique for observing, characterizing and analyzing almost any type of materials. In physical science, the first observations of defects (i.e. dislocations) by TEM ...

    • Understanding the small world: an insight into the application of transmission electron microscopy in characterizing epitaxial layers 

      Zul Azhar, Zahid Jamal, Prof. Dr. (Penerbit Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2010-04)
      Transmission electron microscopy (TEM) is an unrivalled technique for observing, characterizing and analyzing almost any type of materials. In physical science, the first observations of defects (i.e. dislocations) by TEM ...