Search
Now showing items 1-10 of 10
Investigate the liberation of copper from waste Printed Circuit Boards (PCBs)
(Universiti Malaysia Perlis, 2010-06-09)
Nowadays the waste PCBs
increasing sharply proportionally the
number of personal computers which is 5.7
million in 2005 and the predict amounts, it
will be increase to 11.5 Million in 2010
(Unit Perancangan Ekonomi, ...
Morphology study on different composition of bentonite and silica sand in green sand mould for zinc alloy
(Universiti Malaysia Perlis, 2010-06-09)
Zn alloy casting industry using green sand
molding is increasingly becoming to very competitive
circumstance, due to the various casting methods such as
die cast, sand mould and so on with the recent coming of
the ...
Microstructural analysis of iron aluminide fabricated from iron mill scale by powder metallurgy method
(Universiti Malaysia Perlis, 2010-06-09)
This research describes the
microstructural of iron aluminide which
fabricated from iron mill scale by powder
metallurgy method. The raw material used
consists of iron mill scale and aluminum
powder. Iron mill scale ...
Preliminary study on the physical properties of palm ash and PCB waste mixed with phenolic resin.
(Universiti Malaysia Perlis, 2010-06-09)
Brake pad is widely used in
automotive industry and consists of various
materials including asbestos which is harmful
to the human and its production exceeds 10 or
more ingredients. In this work, preliminary
investigation ...
Computed Tomography Virtual Lab Software application in Biomedical Electronic Engineering Programme at University Malaysia Perlis
(Universiti Malaysia Perlis, 2010-06-09)
Computed Tomography (CT) is a
medical imaging method and is among the common
equipment or machine in a hospital which is vital in
imaging certain parts of human body for the purpose
of screening and detecting of deceases ...
Microstructure study between lightweight aggregates and cement matrix
(Universiti Malaysia Perlis, 2010-06-09)
This paper presents a study of
lightweight aggregates microstructure using
Scanning Electron Microscope with Energy
Dispersive Spectrometer (SEM-EDS). This
paper examined the topography of the
interfacial zone and the ...
Corrosion behaviour of powder metallurgy aluminium matrix composite reinforced with alumina Saffil™ short fibre
(Universiti Malaysia Perlis, 2010-06-09)
The corrosion behaviour of PM Al composite will be affected by the presence of alloying element and reinforcing phase in the composite. This study focused on magnesium and alumina Saffil™ short fibres reinforcement affected ...
Analysis of particle size and XRD in ZnO-based varistor
(Universiti Malaysia Perlis, 2010-06-09)
ZnO varistors doped with Bi2O3, Sb2O3, CoO, MnO2 and Cr2O3 were prepared separately by
two mixing processes: conventional and masterbatching mixed-oxide process method.
After the mixing process, the ZnO-based varistor ...
Characterization of porous anodic aluminium oxide film on aluminium templates formed in anodizing process
(Universiti Malaysia Perlis, 2010-06-09)
A porous anodic aluminium oxide
(AAO) films were successfully fabricated on
aluminium templates by using anodizing
technique. The anodizing process was done in
the mixed acid solution of phosphoric acid and
acetic ...
Analysis of magnetic coil properties in magnetic induction tomography using FEMM software
(Universiti Malaysia Perlis, 2010-06-09)
In Magnetic Induction Tomography
(MIT) application, the needs of having the best spec
of magnetic coil are very important since this is
among the factors that will provide the best
reconstructed image of the object ...