Search
Now showing items 21-30 of 30
Development of coconut fiber with the addition of fly ash for cement panel application in construction
(Universiti Malaysia Perlis (UniMAP), 2010-10-16)
Natural fibers exist in large quantities and have been classified as waste materials. Coconut fiber is one of them and it is used as addition in fabrication of cement panel. Industrial waste materials such fly ash is ...
Development and properties of coconut fiber reinforced composite cement with the addition of fly ash
(Taylor and Francis, 2012)
In this paper, the effectiveness utilization of agricultural wastes and industrial wastes in the composite cement has been studied in terms of physical and mechanical properties. Twenty weight percent of fly ash and 80 wt.% ...
Effect of curing system on properties of fly ash-based geopolymer bricks
(Praise Worthy Prize, 2013)
The influence of curing time and curing temperature on properties of fly ash-based geopolymer bricks has been studied. The compressive strength and water absorption of geopolymer bricks were investigated which are produced ...
Chemical reactions in the geopolymerisation process using fly ash-based geopolymer: A review
(American-Eurasian Network for Scientific Information (AENSI Publisher), 2011-07)
The development of our world, demanding the power supply which is produced by combustion of coal. Unfortunately, the million of tons of fly ash and related-products have been generated. To overcome these problems, fly ash ...
Reviews on the different sources materials to the geopolymer performance
(AENSI Publisher All rights reserved, 2013-10)
Geopolymer is manufactured from the aluminosilicate source material in example fly ash, silica fume, kaolin, ground granulate blast slag (GGBS), boiler ash and volcano ash reactivated via alkaline solution. But the different ...
Properties of hooked steel fibers reinforced alkali activated material concrete
(EDP Sciences, 2016)
In this study, alkali activated material was produced by using Class F fly ash from Manjung power station, Lumut, Perak, Malaysia. Fly ash then was activated by alkaline activator which is consisting of sodium silicate ...
Design, processing and characterization of fly ash-based geopolymers for lightweight concrete application
(Institute for Scientific Information (ISI), 2013-04)
The mix design of geopolymers plays important role in obtaining desirable compressive strength. Optimum mix design of geopolymers can be applied for application, such as lightweight concrete. In order to determine the ...
Fly ash-based geopolymer lightweight concrete using foaming agent
(MDPI, Basel, Switzerland., 2012-06)
In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium ...
Study on refractory materials application using geopolymer processing
(American Scientific Publishers, 2013-01)
Geopolymer is cementitious binders that do not require the presence of ordinary Portland cement (OPC). Class F fly ash with geopolymer formulations prepared with an alkaline activator (mixture of Na2SiO3 and NaOH solutions) ...
The effect of curing temperature on physical and chemical properties of geopolymers
(Elsevier BV, 2011)
Fly ash-based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, ...