Search
Now showing items 11-20 of 30
The potential of mixing between ordinary portland cement and fly ash to produce the lightweight aggregate
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
In this present study, the lightweight aggregates (LWA) were produced from ordinary Portland cement (OPC) mixed with fly ash with three type of composition. The LWA is produced in granules shape with the diameter of the ...
A study on the synthesis of fly ash-based lightweight aggregate geopolymer concrete
(American Scientific Publishers All rights reserved., 2013-01)
The experiments conducting for current investigation aimed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) and explore the significance and limitations of the activator content on the ...
Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength
(Trans Tech Publications, 2013)
Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...
Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding
(Trans Tech Publications, 2014)
In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...
Properties of lightweight concrete composites with mixture of fly ash and concrete sludge aggregate
(Trans Tech Publications, 2014)
Lightweight foamed concrete is a concrete made by cement slurry mixed with foam so that foamed concrete that is much lighter than conventional concrete can be produced. The objectives of this study is to develop optimal ...
Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature
(Trans Tech Publications, 2014)
This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...
The development of cement composites reinforced coconut fiber with fly ash addition: mechanical properties and fracture behaviour
(Trans Tech Publications, 2013)
This research paper presents a study on the development of cement composites reinforced coconut fiber with fly ash addition. Various content of coconut fiber (3 wt. %, 6 wt. %, 9 wt. %, 12 wt. % and 15 wt. %) was added to ...
The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites
(Trans Tech Publications, 2013)
The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...
Development of pilot plant for novel geopolymer brick making machine
(American-Eurasian Network for Scientific Information, 2013)
With rapid growing country's development and rose in construction activity, rising demand of building materials and increased construction wastes have encouraged the development of new building materials. Geopolymer based ...
Effects of fly ash addition on compressive strength and flexural strength of foamed cement composites
(Trans Tech Publications, 2013)
In this study, the mixing of polystyrene (PS) beads and fly ash as a sand replacement material in foamed cement composites (FCC) has been investigated. Specifically, the mechanical properties such as compressive strength ...