Search
Now showing items 1-5 of 5
The potential of mixing between ordinary portland cement and fly ash to produce the lightweight aggregate
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
In this present study, the lightweight aggregates (LWA) were produced from ordinary Portland cement (OPC) mixed with fly ash with three type of composition. The LWA is produced in granules shape with the diameter of the ...
Effect of curing system on properties of fly ash-based geopolymer bricks
(Praise Worthy Prize, 2013)
The influence of curing time and curing temperature on properties of fly ash-based geopolymer bricks has been studied. The compressive strength and water absorption of geopolymer bricks were investigated which are produced ...
Chemical reactions in the geopolymerisation process using fly ash-based geopolymer: A review
(American-Eurasian Network for Scientific Information (AENSI Publisher), 2011-07)
The development of our world, demanding the power supply which is produced by combustion of coal. Unfortunately, the million of tons of fly ash and related-products have been generated. To overcome these problems, fly ash ...
Properties of hooked steel fibers reinforced alkali activated material concrete
(EDP Sciences, 2016)
In this study, alkali activated material was produced by using Class F fly ash from Manjung power station, Lumut, Perak, Malaysia. Fly ash then was activated by alkaline activator which is consisting of sodium silicate ...
The effect of curing temperature on physical and chemical properties of geopolymers
(Elsevier BV, 2011)
Fly ash-based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, ...