Search
Now showing items 1-10 of 10
Surface roughness and wettability correlation on etched platinum using reactive ion ecthing
(Trans Tech Publications, 2014-01)
As the world of semiconductor is moving towards smaller and high-end applications, the quality of the bonding adhesion for wire bonding is very critical. Although aluminium has been the metallization of choice in integrated ...
Physical characterization of BST with different (x') ratios
(Trans Tech Publications, 2014)
Nowdays Barium strontium titanate (BST) can be applied into many fields of engineering. Its properties attracted more researchers to research and apply it into many fields of study. In this work, sol-gel method of preparing ...
Interaction relationship analysis of surface roughness on aluminium etched wafer using RIE
(Trans Tech Publications, 2014)
This paper presents the interaction relationships between Tetrafluoromethane (CF₄) gas, Oxygen (O₂) gas, and RF power in response to the surface roughness of an Aluminium deposited wafer after being etched using Reactive ...
Surface roughness scrutinizaton with RIE CF₄+Argon gaseous on platinum deposited wafer
(Trans Tech Publications, 2014)
Aluminium metallization has a disadvantage when it comes to high-end applications as it cannot withstand the high temperature and pressure. This paper studies the factors that affect the surface roughness on a Platinum ...
Surface roughness analysis on reactive ion etched aluminium deposited wafer
(Trans Tech Publications, 2014)
This paper investigates the factors that affect the surface roughness on an Aluminium deposited wafer after reactive ion etching (RIE) using a combination of Tetrafluoromethane (CF₄) and Oxygen (O₂) gaseous. A total of ...
Investigation of surface roughness on platinum deposited wafer after reactive ion etching using SF₆+Argon gaseous
(Trans Tech Publications, 2014)
This paper investigates the factors that affect the surface roughness on a Platinum deposited wafer after reactive ion etching (RIE) using a combination of SF₆ and Argon gaseous. A total of three controllable process ...
Main effects study on plasma etched aluminium metallization
(Trans Tech Publications, 2014-01)
Main effects contributing to the quality of surface roughness on an etched aluminium metallization wafer using Reactive Ion Etching (RIE) was studied. A total of three controllable process variables, with eight sets of ...
Effect of surface roughness of pure aluminium A1100 on the cold work extrusion by using different angles of taper die
(Trans Tech Publications, 2014-01)
The study presented in this paper is focused on the effect of surfaces roughness of pure aluminium A1100 on the cold work extrusion process by three different angles of taper die. Different angles of taper die will affect ...
Strength of ductile adhesive butt joint bonded with dissimilar adherents: effect of surface roughness
(Trans Tech Publications, 2014-06)
The purpose of this project is to study the influence of the macroscopic state of surface
roughness of the dissimilar adherent on the strength of adhesive joint. In this project, several types of sandpaper were used to ...
Investigate the effect of using sunflower oil as a lubricant during turning operation of stainless steel
(Praise Worthy Prize, 2014-01)
The study was focused on the effect of using Sunflower Oil as a lubricant during turning operation of Stainless Steel. Cutting speed, feed rate and depth of cut were set as the control factor for the machining operation. ...