Browsing Researchers by Subject "Geopolymers"

Now showing items 1-20 of 48

    • Application of clay - based geopolymer in brick production: A review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (Trans Tech Publications, 2013)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...

    • Bond strength mechanism of fly ash based geopolymer mortars: a review 

      ‪Warid Wazien, Ahmad Zailani; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Mohd Remy Rozainy, Mohd Arif Zainol‬; Muhammad Faheem, Mohd Tahir (IOP Publishing Ltd, 2017-11)
      Geopolymer possess many excellent properties such as high compressive and bond strength, long term durability, better acid resistance and also known as a "Sustainable Material" due to its low carbon emission and low energy ...

    • Calcined kaolin geopolymeric powder: Influence of water- to geopolymeric powder ratio 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; cheng, Yong Heah (Trans Tech Publications, 2012-07)
      This paper describes the synthesis of calcined kaolin geopolymeric powder from the alkaline activation of calcined kaolin followed by solidification and pulverizing process. The geopolymeric powder was used by just adding ...

    • Characterization of geopolymer ceramic reinforced Sn-0.7Cu composite solder: effect of milling time and speed 

      Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Thiaghu, Maiteli; Nur Syahirah, Mohamad Zaimi; Romisuhani, Ahmad (IOP Publishing Ltd, 2019-12)
      The effect on the addition of optimally ball milled kaolin and fly ash geopolymer ceramic as reinforcement on the morphology and electrical properties of Sn-0.7Cu composite solder were explored. Geopolymer ceramics from ...

    • Compressive strength and thermal conductivity of metakaolin geopolymers with anisotropic insulations 

      Nur Ain, Jaya; Yun-Ming, Liew; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Cheng Yong, Heah; Ridho, Bayuaji; Muhammad Faheem, Mohd Tahir (IOP Publishing Ltd, 2020-02)
      This research investigated the properties of thermally insulating geopolymer prepared using waste filler (fibreboard and rubber) to act as anisotropic pore/insulation. The geopolymer matrix was synthesised using metakaolin ...

    • Correlating composition design and properties of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Heah, Cheng Yong (American Scientific Publishers, 2013-12)
      This paper discussed the relation between composition design and properties of calcined kaolin geopolymeric powder. Geopolymeric powder was produced by applying the geopolymerization process. The solids-to-liquid ratios ...

    • Correlation of microstructure and flexural strength of fly ash geopolymer of varying molarities 

      Yong-Sing, Ng; Yun-Ming, Liew; Cheng-Yong, Heah; Mohd Mustafa Al Bakri, Abdullah; Hui-Teng, Ng; Amir, Naveed (IOP Publishing Ltd, 2019-08)
      The present work studies and compares the flexural properties of fly ash geopolymer with varying molarity of sodium hydroxide (NaOH). Different molarities of NaOH solution (6M, 8M, 10M, 12M and 14M) are used to prepare the ...

    • Correlation of the processing parameters in the formation of granulated ground blast furnace slag geopolymer 

      Ikmal Hakem, Aziz; Mohd Mustafa Al Bakri, Abdullah; Yong, H C; Ming, L Y; Panias, D; Sakkas, K (IOP Publishing Ltd, 2017-06)
      Geopolymers are inorganic materials with huge potential applications including building material, fire resistant materials, and agricultural construction materials. Various parameters influenced the final properties of ...

    • Corrosion studies of fly ash and fly ash-slag based geopolymer 

      Farah Farhana, Zainal; ‪Siti Farahnabilah, Muhd Amli; Kamarudin, Hussin; Azmi, Rahmat; Mohd Mustafa Al Bakri, Abdullah (IOP Publishing Ltd, 2017-06)
      This paper presents the results of corrosion studies between Fly Ash Geopolymer (FG) paste and Fly Ash-Slag Geopolymer (FSG) paste. Geopolymer was made from aluminosilicate inorganic polymers mixed with the alkaline activator ...

    • Curing Behavior on kaolin-based geopolymers 

      Cheng, Yong Heah; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohammed, Hussain; Luqman, Musa; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Che Ghazali; Liew, Y. M. (Trans Tech Publications, Switzerland., 2012)
      This paper aims at investigating the influence of curing process on kaolin-based geopolymers. Kaolin-based geopolymers were prepared by the alkali-activation of kaolin with alkali activating solution (mixture of NaOH and ...

    • Design, processing and characterization of fly ash-based geopolymers for lightweight concrete application 

      Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Sandu, Andrei Victor; Mohamed, Bnhussain, Prof. Dr.; Zarina, Yahya; Rafiza, Abdul Razak (Institute for Scientific Information (ISI), 2013-04)
      The mix design of geopolymers plays important role in obtaining desirable compressive strength. Optimum mix design of geopolymers can be applied for application, such as lightweight concrete. In order to determine the ...

    • Durability of fly ash based geopolymer concrete infilled with rubber crumb in seawater exposure 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; S. N. H. Ramli; Minciuna, M. G.; Rafiza, Abd Razak (IOP Publishing Ltd, 2018-06)
      Geopolymer is an alternative binder to replace Ordinary Portland Cement (OPC)in construction industry. Source materials that rich in silica (Si) and alumina (Al) were activated by using alkaline solution. Production of ...

    • Durability of metakaolin geopolymers with various sodium silicate/sodium hydroxide ratios against seawater exposure 

      Nur Ain, Jaya; Mohd Mustafa Al Bakri, Abdullah; Li, Long-Yuan; Sandu, Andrei Victor; Kamarudin, Hussin; Ming, Liew Yun (AIP Publishing, 2017-09)
      This work presents an investigation of the performance of metakaolin geopolymers exposed to the continuous immersion of seawater. The geopolymers were prepared from metakaolin by activating with a mixture of sodium ...

    • Effect of alkali concentration on fly ash geopolymers 

      Siti Fatimah Azzahran, Abdullah; Liew, Yun-Ming; Mohd Mustafa Al Bakri, Abdullah; Heah, Cheng-Yong; Khairunnisa, Zulkifly; Kamarudin, Hussin (IOP Publishing Ltd, 2018-03)
      This paper presents the effect of NaOH concentration on fly ash geopolymers with compressive up to 56 MPa at 12M. The physical and mechanical on fly ash geopolymer are investigated. Test results show that the compressive ...

    • Effect of alkali concentration on mechanical properties of kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Husain; Luqman, Musa; Khairul Nizar, Ismail; Liew, Yun Ming (Foundation for Materials Science and Engineering, 2012)
      Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...

    • Effect of alkali concentration on mechanical properties of kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Liew, Yun Ming (Procema SA, 2012)
      Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...

    • The effect of baggase ash on fly ash-based geopolimer binder 

      Bayuaji, R.; M. S., Darmawan; N. A. Husin; Banugraha, R.; M. Alfi; Mohd Mustafa Al Bakri, Abdullah (IOP Publishing Ltd, 2018-06)
      Geopolymer concrete is an environmentally friendly concrete. However, the geopolymer binder has a problem with setting time; mainly the composition comprises high calcium fly ash. This study utilized bagasse ash to improve ...

    • Effect of different ratio of geopolymer paste based fly ash-metakaolin on compressive strength and water absorption 

      Nor Shida Dalila, Mohd Azhar; Farah Farhana, Zainal; Mohd Mustafa Al Bakri, Abdullah (IOP Publishing Ltd, 2019-12)
      This paper presents the effect of different solid to solid (S/S) ratio by mixing the fly ash and metakaolin as geopolymer paste on the compressive strength and water absorption. Fly ash is a waste materials produced by ...

    • Effect of mechanical activation on kaolin-based geopolymers 

      Cheng, Yong Heah; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohammed, Hussain; Luqman, Musa; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Liew, Y. M. (Trans Tech Publications, 2012)
      Raw materials kaolin was subjected to mechanical modification; the effect of the mechanical activation of kaolin on the compressive strength and morphological properties of the geopolymers has been studied. Mechanical ...

    • Effect of sodium hydroxide molarity on physical, mechanical and thermal conductivity of metakaolin geopolymers 

      Nur Ain, Jaya; Liew, Yun-Ming; Mohd Mustafa Al Bakri, Abdullah; Heah, Cheng-Yong; Kamarudin, Hussin (IOP Publishing Ltd, 2018-03)
      In the present work, the effect of different sodium hydroxide (NaOH) molarity (6M, 8M, 10M, 12M and 14M) on the physical, mechanical and thermal conductivity of metakaolin geopolymers (MkGPs) was investigated. Geopolymers ...