Browsing Researchers by Subject "Fabrication"

Now showing items 1-14 of 14

    • Capacitive micromachined ultrasonic tranducers: Technology and application 

      Muhammed Sabri, Salim; Mohd Fareq, Abd. Malek, Dr.; Boon, Raymond Whee Heng, Prof. Dr.; Khairudi, Mohd Juni.; Naseer, Sabri (Elsevier B.V., 2012-03)
      Capacitive micromachined ultrasonic tranducers (cMUTs) have recently emerged as an alternative to conventional piezoelectric transducers. They offer many advantages in terms of bandwidth, fabrication of layer arrays, ...

    • A cost effective and consummate fabrication teaching set up for microelectronic engineering undergraduate 

      Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Mohammad Nuzaihan, Md Nor (Malaysian Invention & Design Society (MINDS), 2005-05-19)
      The package, which is fully designed and developed using KUKUM in-house expertise, is the first teaching laboratory that is purposely built for undergraduate microelectronic program in Malaysia.

    • Design and fabrication of PDMS microchamber for fast reaction assays in biosensing application. 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; A.Wesam, Al-Mufti (Trans Tech Publications, 2013)
      A simple design of a microchamber for use in reacting assays with limited sample availability has been proposed, analyzed using COMSOL 3.5 Multiphysics simulation and fabricated using soft-lithography technique. The design ...

    • Fabrication of a Hand-held Electronic Nose 

      Marni Azira, Markom; Ali Yeon, Md Shakaff; Abdul Hamid, Adom; Mohd Noor, Ahmad; Abu Hassan, Abdullah (Universiti Malaysia Perlis, 2007)
      An electronic nose is a device that performs the electronic olfactory to substitute human experts. The development of these devices is growing faster due to higher demand. However, current electronic noses usually are very ...

    • Fabrication of nanowire using ash trimming technique 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Leow, Pei Ling; Qazi Muhammad, Humayun (Trans Tech Publications, 2013)
      The paper present a report on fabrication of Nanowire using plasma oxidation, we monitor changes by studying the morphology and Δw/Δh, the study also revealed that the proposed fabrication method could potentially be used ...

    • Low cost fabrication of micromixer and microchamber for microfluidic lab-on-chip 

      Uda, Hashim, Prof. Dr.; Tijjani Adam, Shuwa; M. Wesam, Al-Mufti; Ling, Peter Jie Lung; Shahrul Aizzam, Ariffin (Institute of Electrical and Electronic Engineers (IEEE), 2012)
      Microfluidic technology has been given the contribution in biomedical and chemistry. The testing and diagnosis on bio-reagents has the efficiency increased through the implementation of microfluidic technology, such as lab ...

    • Mask design for the reproducible fabrication and reliable pattern transfer for polysilicon nanowire 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Leow, Pei Ling (Institute of Electrical and Electronics Engineers (IEEE), 2012)
      In fabrication of Nanowire alignment and exposure are the most critical steps in photolithography process, the resolution requirements and precise alignment are vital, each mask needs to be precisely aligned with original ...

    • Microfluidics design and fabrication for life sciences application 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Foo, Kai Loong (American Scientific Publishers, 2013-01)
      This paper introduces a simple design and fabrication for microfluidics that need no external pumping power to delivery fluid into sensing domain with minimum sample available. Analysis using COMSOL 3.5 Multiphysics ...

    • Novel in-house fabrication of nano lab-on-chip devices 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Dhahi, Th Sabar; Leow, Pei Ling; Chee, Pei Song (Bentham Science Publishers, 2013)
      20nm SiNWs transducers have been fabricated by means of simple in-house fabrication method. A low cost, simple top-down approach has been successfully used for the fabrication of very sensitive SiNWs. The fabrication was ...

    • Physical properties of FG HAP-F75 fabricated by powder metallurgy 

      Noorazimah, Mohd Ab Llah; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Functional graded (FG) HAP-F75 was prepared by powder metallurgy technique. Three layers of functional graded HAP-F75 was fabricated using single punch hydraulic press. The fabrication technique consists of mixing, pressing ...

    • Precise alignment of individual single-walled carbon nanotube using dielectrophoresis method for development and fabrication of pH sensor 

      Uda, Hashim, Prof. Dr.; Foo, Wah Low; Liu, Wei Wen, Dr. (Hindawi Publishing Corporation, 2013)
      Development and fabrication of single-walled carbon nanotube (SWNT) based pH sensor were reported. The precise alignment of individual SWNT using dielectrophoresis method between the two microgap electrodes was conducted, ...

    • Selection of optimal parameters in fabrication of poly (dimethylsiloxane) microfluidics using taguchi method 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Leow, Pei Ling; Foo, Kai Loong; Chee, Pei Song (American Scientific Publishers, 2013-01)
      The excellent performance and achievements by the microfluidics systems at fluid flow manipulation in the recent years have ignited the passion and interest of many researchers around the world, Since a microfluidic is ...

    • Silicon implementation of micro pressure sensor 

      Yufridin, Wahab; Zayegh, Aladin; Begg, Rezaul (Institute of Electrical and Electronics Engineers (IEEE), 2010-04-12)
      Pressure sensing is one of the mostly performed measurement encompassing varieties of applications. The latest technology such as silicon based Micro-electromechanical Systems (MEMS) technology is favoured due to its ...

    • Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants 

      Shah Fenner Khan, Mohamad Khan; Dalgarno, Kenneth W.; German, Matthew J. (Taylor & Francis Group, London., 2011-09-28)
      Rectification of defective bone structures due to trauma or deformation has benefited from the introduction of mostly rigid metal prostheses. However, the high stiffness of metal implants can cause stress shielding in bone ...