Search
Now showing items 1-10 of 10
Sulfuric acid attack on ordinary Portland cement and geopolymer material
(Institute for Scientific Information (ISI), 2013-09)
The resistance of ordinary Portland cement binder towards acid had been widely discussed by researchers. The deterioration effect of this binder may cost high repair expense and rehabilitation. Geopolymer material is a new ...
Mechanical properties of dissimilar welds between stainless steel and mild steel
(Trans Tech Publications, 2013)
Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ...
Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets
(Trans Tech Publications, 2013)
Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ...
Mechanical properties and structure formation amorphous of Zr₅₉Ta₅Cu₁₈Ni₈Al₁₀ bulk metallic glass alloy
(Universiti Malaysia Perlis, 2013)
In the present paper thermal stability and structure of Zr₅₉Ta₅Cu₁₈Ni₈Al₁₀ (numbers indicate at.%) glassy alloys were investigated. The structural studies revealed an amorphous structure for the rod with a diameter of 2 ...
Mechanical properties of polymer composites with sugarcane bagasse filler
(Trans Tech Publications, 2013)
Natural fibers reinforced polymer composites have gained more interest because of their biodegradable, light weight, less expensive sources, easy processing, high specific modulus and also environmentally friendly appeal. ...
Mechanical properties of paper from oil palm pulp treated with chitosan from horseshoe crab
(AENSI Publisher All rights reserved, 2013-10)
The application of chitosan as an additive in papermaking to improve the strength and water resistant properties is described. Unbleached sulphate pulp from oil palm stem was treated with chitosan. The chitosan was prepared ...
Effect of sintering on the physical and mechanical properties of Co-Cr-Mo (F-75)/HAP composites
(Universiti Kebangsaan Malaysia, 2013-12)
This paper reports on the effects of HAP addition and sintering temperature on the microstructure and properties of the F-75/HAP composites fabricated by powder metallurgy. Co-Cr-Mo (F-75) is used in orthopedics because ...
Yttria stabilized zirconia formed by micro ceramic injection molding: Rheological properties and debinding effects on the sintered part
(Elsevier, 2013-04)
Micro Ceramic Injection Molding (μCIM) is a near net-shape process to produce smaller and intricate parts at a competitive cost. The application of nano-sized ceramic powder in μCIM has the advantages of fine grain size ...
Particle size – dependent on the static and dynamic compression properties of polypropylene/silica composites
(Elsevier, 2013-03)
The effect of particle size is widely known as an essential factor that influences the mechanical properties of particulate filled polymer composites. However, there is a limited number of works available, on the particular ...
Mechanical, morphological and thermal properties of chitosan filled polypropylene composites: The effect of binary modifying agents
(Elsevier B.V., 2013)
This work investigates the effects of the binary modifying agents-organosolv lignin and acrylic acid, on the mechanical and thermal properties of chitosan-filled polypropylene (PP) composites. We analyse the mechanical and ...