Search
Now showing items 1-10 of 13
Fly ash porous material using geopolymerization process for high temperature exposure
(MDPI AG (Basel, Switzerland), 2012-04)
This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers ...
Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder
(Scientific.Net/Trans Tech Publications, 2012-12)
The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ...
Strength and microstructural properties of mechanically-activated kaolin geopolymers
(Trans Tech Publications, 2012-12)
Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...
Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer
(Trans Tech Publications, 2012)
Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...
Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength
(Trans Tech Publications, 2013)
Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...
Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding
(Trans Tech Publications, 2014)
In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...
Application of clay - based geopolymer in brick production: A review
(Trans Tech Publications Inc., 2013)
This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...
Properties of metakaolin geopolymeric binder
(American Scientific Publishers, 2013-01)
This paper investigates the physical and mechanical properties as well as the morphology study of the MK geopolymeric binder. Mixture of waterglass liquid and NaOH solution were used as the activator solution for the ...
Correlating composition design and properties of calcined kaolin geopolymeric powder
(American Scientific Publishers, 2013-12)
This paper discussed the relation between composition design and properties of calcined kaolin geopolymeric powder. Geopolymeric powder was produced by applying the geopolymerization process. The solids-to-liquid ratios ...
Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature
(Trans Tech Publications, 2014)
This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...