Now showing items 52-71 of 3386

    • Aerial platforms to ensure communications reliability in disaster areas 

      Satea Hikmat, Alnajjar; Mohd Fareq, Abdul Malek, Dr.; Mohd Sharazel, Razalli; Mohd Saufi, Ahmad (American Scientific Publishers, 2014-02)
      Wireless mobile networking technology can be used to reduce a negative effect that occurs in disaster areas. This study, will present an innovative technique via utilize a Low-altitude platform, in order to provide expanded ...
    • Aerodynamic study of a modern sepak takraw ball using smoke flow visualization technique 

      Abdul Syakir, Abdul Mubin; Norhafizan, Ahmad (Kementerian Pendidikan Tinggi (KPT), Malaysia, 2015)
      It has been shown in previous studies that the flight trajectories of sports balls are influenced by their aerodynamic characteristics. These aerodynamic characteristics are primarily dependent on the physical shape and ...
    • Aerodynamic study of combustor using axial swirler 

      Mohammad Nazri, Jaafar; M. K. F., M. Nor; Mohamad Shaiful Ashrul, Ishak (Praise Worthy Prize S.r.l., 2011-01)
      A study has been conducted to investigate the flow pattern in a gas turbine combustion chamber by simulation and experimental approaches. Flow pattern inside a combustor is important to self sustain the flame, increase ...
    • Agar tak makin sadis 

      Zulkarnaen, Lubis, Dr. (Waspada Medan, 2014-04-10)
      Mari kita sejenak beralih dari hal-hal yang berbau politis, lupakan sementara gonjang ganjing politik yang semakin dinamis, hilangkan dulu gairah dan ambisi para politisi yang sukanya merayu dan menebar janji-janji manis--yang ...
    • Aggregation threshold for Novel Au – LiNbO3 core/shell Nano composite: effect of laser ablation energy fluence 

      Raid., A. Ismail; Evan., T. Salim (Universiti Malaysia Perlis (UniMAP), 2022-07)
      In this paper, unique nanocomposites of Gold: Lithium Niobate (Au-LiNbO3) were synthesized for the first time utilizing pulse laser ablation in liquid method (PLAL). Q-switched neodymium-doped yttrium aluminum garnet (Nd: ...
    • Aktuari sebagai pegawai tertinggi kerajaan dari perkspektif sejarah dan era kemodenan 

      Haslifah, Mohamad Hasim (Center for Communication Technology And Human Development (UniMAP), 2015)
      Aktuarius adalah merupakan satu jawatan tertinggi kerajaan Empayar Rom Purba yang pada asalnya ditugaskan sebagai pencatat minit dalam Senat Rom. Masa berlalu dan peranan aktuarius terus berkembang sehingga ke zaman Empayar ...
    • Al Zarnuji's Learning Principles in the Malaysian National Education Philosophy: an integrated model of Islamic Spiritual Intelligence 

      Tengku Mohd Farid, Tengku Abdul Aziz; Nurul Iman, Ahmad Bukhari; Muhammad Luqman Ibnul Hakim, Mohd Saad (Center for Communication Technology and Human Development (UniMAP), 2019)
      One of the underlying principles of the Malaysia National Education Philosophy (NEP) is to produce well-balanced human capital in terms of physical, intellectual, emotional and spiritual aspects. However, of all human ...
    • Alam semesta dan bencana alam dari perspektif agama dan sains 

      Mahayudin, Haji Yahaya (Center for Communication Technology And Human Development (UniMAP), 2012)
      Artikel ini yang berjudul "Alam semesta dan Bencana alam dari perspektif agama dan sains' bertujuan untuk menganalisis serta membincangkan beberapa isu mengenai kejadian alam semesta serta perubahan-perubahan yang berlaku ...
    • Algorithm to improve process robustness in the assembly & test manufacturing industry a case study of the 1064nm wavelength laser mark equipment 

      Darin Moreira A/L Anthony Vincent; Bhuvenesh, Prof. Dr. Rajamony (Trans Tech Publications, 2013-09)
      This document explains and demonstrates the generic improvement algorithm created to enhance the maintenance methodology in the semiconductor manufacturing environment. The use of this algorithm demonstrates how a process ...
    • Alignment mark architecture effect on alignment signal behavior in advanced lithography 

      Normah, Ahmad; Uda, Hashim; Mohd Jeffrey, Manaf; Kader Ibrahim, Abdul Wahab (Institute of Electrical and Electronics Engineering (IEEE), 2006)
      The downscaling of CMOS technology becomes a challenge to the scanner alignment system since overlay and alignment accuracy becomes tighter. Such a tight overlay requirement requires a very stable alignment performance. A ...
    • Aliran Genangan bagi Bendalir Mikrokutub terhadap Permukaan Mencancang yang Telap dengan Fluks Haba Boleh Ubah 

      Wan Mohd Khairy Adly, Wan Zaimi; Anuar, Ishak (Penerbit UKM, 2012-05)
      Dalam makalah ini, masalah aliran genangan dalam bendalir mikrokutub terhadap permukaan mencancang yang telap dengan fluks haba boleh ubah dipertimbangkan. Dengan menggunakan penjelmaan keserupaan, persamaan asas yang ...
    • Alkali activated blast-furnace slag cement: The opportunity to solve sustainable issues 

      Aimi Noorliyana, Hashim; Mohd Mustafa Al Bakri, Abdullah; Azira, M.N.; Noor Mariamadzliza, Mohd Nan; Kamrosni, Abdul Razak; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (American-Eurasian Network for Scientific Information, 2013)
      This paper aimed at investigating the possibility of alkali activated blast-furnace slag (BFS) to produce cement powder that could be alternative to ordinary Portland cement. It was found that an alkali activated BFS ...
    • All-Solution-Non-Vacuum fabrication process of CZTS solar cell using ZTO as Non-Toxic Buffer Layer 

      Yusuf, Yuda Prawira; Refantero, Gema; Nugroho, Harbi Setyo; Harito, Christian; Rachmat, Adhi Wibowo; Eka Cahya, Prima; Nugraha; Camelia, Panatarani; Yuliarto, Brian (Universiti Malaysia Perlis (UniMAP), 2020-04)
      Material based on copper zinc tin sulfide (CZTS) has been investigated to obtain its optimum performances due to the non-toxicity, elemental abundance, and large production capacity. In this work, fabrication of CZTS-based ...
    • Alleviation noise effect using flexible cross correlation code in spectral amplitude coding optical code division multiple access systems 

      Mohd Rashidi, Che Beson; Syed Alwee Aljunid, Syed Junid, Prof. Dr.; Farid, Ghani, Prof. Dr.; Anuar, Mat Safar, Ir. Dr.; Hilal Adnan, Fadhil, Dr. (Engineering and Technology Publishing, 2013)
      A new code for Spectral Amplitude Coding - Optical Code Division Multiple Access (SAC-OCDMA) is proposed and is called Flexible Cross-correlation (FCC) code. The FCC code possesses various advantages; including easy code ...
    • Alteration in the microstructure of fly ash geopolymer upon exposure to elevated temperatures 

      Omar A., Abdulkareem; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2013)
      This paper represents the mechanical and microstructure changes in geopolymeric material synthesized by the alkali activation of locally source fly ash at high temperatures of 400, 600 and 800 °C. The high compressive ...
    • Alteration of traditional Batak Toba's culture consequence of the time development 

      Meyga Fitri Handayani, St, MT; Dharma Widya, MT., Ir. (Universiti Malaysia Perlis, 2013)
      Traditional architecture is the expression of the human creation which is one of the element cultures grow and evolve along with the growth and development of the cultural community, ethnic, or nation that elements in ...
    • Alternatif keagamaan dan kaunseling; sebagai rawatan utama mengatasi permasalahan homoseksualiti 

      Amran, Hassan; Noriah, Mohamed (Center for Communication Technology And Human Development (UniMAP), 2014)
      Gejala homoseksual merupakan budaya songsang yang sudah lama bertapak dalam kehidupan masyarakat sejak zaman berzaman lagi. Pembudayaan cara hidup yang songsang ini menjadi satu cara hidup yang tidak berlandaskan kenormalan ...
    • Alternative-current electrochemical etching of uniform porous silicon for photodetector applications 

      Husnen R., Abd; Yarub, Al-Douri, Assoc. Prof. Dr.; Naser Mahmoud, Ahmed, Dr.; Uda, Hashim, Prof. Dr. (Electrochemical Science Group, 2013)
      The twining of alternative-current (AC) with electrochemical etching (ECE) to fabricate porous silicon (PS) is studied. The porosity percentage is obtained by gravimetric analysis. The effect of different current densities; ...
    • Aluminium - Polymer abs product 

      Mohd Ichwan, Nasution; Kamaruddin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Khairel Rafezi, Ahmad; Faizul, Che Pa; Chek Idrus, Omar (Universiti Malaysia Perlis (UniMAP), 2012)
      Material used for aluminium product usually made of aluminium scrap. Currently, the price of aluminium scrap is increase. It is necessary to minimize the cost of production by reducing the weight of the aluminium product ...
    • Aluminium parts from scrap using new technique 

      Mohammed Misbahul, Amin; Ku Halim, Ku Bulat; Hamdan, Suhaimi (Journal of Ultra Scientist of PhysicalFaculty of Science and Professional Arts,Sciences, Universiti Putra Malaysia Terengganu, 2000)
      A new method for making aluminium parts using scrap under Asian condition has been suggested. The new technique is known as Powder Metallurgy (P/M) and is the technology of future. The process is economic, clean, requires ...