Browsing Journal Articles by Title
Now showing items 596-615 of 3156
-
Design and fabrication of PDMS microchamber for fast reaction assays in biosensing application.
(Trans Tech Publications, 2013)A simple design of a microchamber for use in reacting assays with limited sample availability has been proposed, analyzed using COMSOL 3.5 Multiphysics simulation and fabricated using soft-lithography technique. The design ... -
Design and fabrication of silicon nanowire based sensor
(Electrochemical Science Group (ESG), 2013)This paper reports the process development of silicon nanowires sensor requires both the fabrication of nanoscale diameter wires and standard integration to CMOS process. By using silicon-on-insulator (SOI) wafer as a ... -
Design and fabrication of uniform aluminium pores for planar microfiltration system
(Universiti Malaysia Perlis (UniMAP), 2020-12)This paper presents a design and fabrication of a fluid filtration system for separating biological molecules through uniform pores in silicon-based planar microfiltration system. The study is aimed to find a simple ... -
Design and kinematic analysis of parallel robot for ankle rehabilitation
(Trans Tech Publications, 2013)Ankle injury is one of the most common injuries in sports or domestic related accidents. This injury can usually be treated via a number of rehabilitation exercises. However, currently rehabilitation of ankle injury directly ... -
Design and measurement-based evaluation of multi-antenna mobile terminals for LTE 3500MHz band
(EMW Publishing, 2013)Design of multi-element antennas (MA) for small mobile terminals operating at higher frequencies remains challenging despite smaller antenna dimension and possibility of achieving electrically large separation between them. ... -
Design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture
(Elsevier B.V., 2008-10)This paper describes the design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture such as liquid/gas and oil/gas flow which commonly found in chemical columns and industrial pipelines. ... -
Design and Optimize Solid Microneedle using Genetic Algorithm
(IOP Publishing, 2019)Microneedle is an example of Transdermal drug delivery (TTD) device. It is known for eliminating pain and inconvenient intravenous injections. This study presents a work on design microneedle and optimize the designs using ... -
Design and Preparation of Low Absorbing Antireflection Coatings Using Chemical Spray Pyrolysis
(Universiti Malaysia Perlis (UniMAP), 2018-10)Transmission of laser optical elements has been increased when Indium tin oxide (ITO) thin film of relatively high index with different content of Sn was used to prepare ultra thin antireflection coating(ARC's) utilizing ... -
Design and simulation a new code with zero cross-correlation for SAC-OCDMA networks
(INSInet Publications, 2012-03)Design and simulation of new code family for the Spectral Amplitude Coding-Optical Code Division Multiple Access (SAC-OCDMA) networks is present. The new code family called Multi Diagonal (MD) code. The MD code family ... -
Design and simulation of film bulk acoustic wave resonator in kuband
(Trans Tech Publications, 2013)This paper presents the design of a Film Bulk Acoustic Wave Resonators (FBARs) operating in Ku-band. The one-dimensional (1-D) numerical and the three-dimension (3-D) Finite Element Method (FEM) simulation results are ... -
Design aspects of bioreactors for solid-state fermentation: A review
(Croatian Association of Chemical Engineers, 2011)Solid-state fermentation has gained renewed attention, not only from researchers but also from industries, due to several advantages over submerged fermentations. This is partly because solid-state fermentation has lower ... -
Design consideration for front-end system in ultrasonic tomography
(Penerbit UTM Press, 2013)The hardware development of the ultrasonic tomography comprises three main parts; the sensor unit, electronic measurement circuits combined with a data acquisition system and finally the display unit. The research done is ... -
Design considerations of high performance optical code division multiple access: A new spectral amplitude code based on laser and light emitting diode light source
(The Institution of Engineering and Technology, 2010-02-01)A new code of optical code division multiple access (OCDMA) based on spectral amplitude coding (SAC) is described and analysed. The coding technique is called random diagonal (RD) code. One of the important properties of ... -
Design development of acoustic waves based sensitive sensors for Escherichia coli O157:H7 detection
(Trans Tech Publications Inc., 2014-04)Food contamination has become critical issue and is being worse due to the insensitive detection devices. One of the dangerous food contaminations is by Escherichia coli (E.coli) O157:H7, one of the harmful bacterial ... -
Design of 100nm single-electron transistor (SET) by 2D TCAD simulation
(Institute of Electrical and Electronics Engineering (IEEE), 2006)One of the great problems in current large-scale integrated circuits (LSIs) is increasing power dissipation in a small silicon chip. Single-electron transistor (SET) which operate by means of one-by-one electron transfer, ... -
Design of 3D micromixer for bio-synthesis using COMSOL multiphysics software package
(American Scientific Publishers, 2013-12)Moving parts of micrometer scale make the chips very expensive and fragile and are therefore to be avoided if at all possible. An alternative method for transporting fluid in the samples is through capillary effect, the ... -
Design of 4.0 kWp Solar PV System for Residential House under Net Energy Metering Scheme
(Universiti Malaysia Perlis (UniMAP), 2017)Renewable Energy Act (RE Act) has been gazetted by Malaysian Government in 2011 to catalyse energy generation from renewable resources. The Feed-in Tariff (FiT) scheme was introduced to promote energy generation from solar ... -
The design of a Biochamber for Micropropagation of Banana tissue culture plants and controlling the Biochamber process using Programmable Logic Controller (PLC)
(Kolej Universiti Kejuruteraan Utara Malaysia, 2005)Biochamber of banana tissue culture is one of the technology for plant propagation that using the Aeroponics System. The aeroponics method is applied because it requires sterile environment. The project is done in order ... -
Design of a broadband all-textile slotted PIFA
(Institute of Electrical and Electronics Engineering (IEEE), 2012-01)A new broadband textile based PIFA antenna structure designed for wireless body area network (WBAN) applications is presented. The new topology can be directly integrated into clothing. The study starts by considering three ... -
Design of a free electron maser without wiggler
(World Scientific and Engineering Academy and Society (WSEAS), 2010-04)We are developing prototype free electron maser (FEM) that is compact, powerful and efficient for potential industrial applications. The design, set-up and results of a novel X-band rectangular waveguide prebunched free ...