Browsing Journal Articles by Title

Now showing items 2611-2630 of 3156

    • Shear ram speed characterization for copper wire bond shear test 

      Zaliman, Sauli, Prof. Madya Dr.; Retnasamy, Vithyacharan; Ahmad Husni, Mohd Shapri; Norazeani, Abdul Rahman; Wan Mokhzani, Wan Norhaimi; Taniselass, Steven; Abdul Halis, Abdul Aziz (Trans Tech Publications, Switzerland., 2012)
      This paper presents the evaluation of the stress and strain response of the copper ball bond during wire bond shear test using finite element analysis. A 3D non-linear finite element model was developed for the simulation. ...

    • Shear speed analysis on Sn-3.9Ag-0.6Cu Solder 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Fairul Afzal, Ahmad Fuad; Ehkan, Phaklen, Dr.; Ong, Tee Say; Vairavan, Rajendaran (Trans Tech Publications (TTP), 2013)
      Ball Grid Array (BGA) is a type of semiconductor interconnection used in Integrated Circuit (IC) which is being scaled down to micro and nano size. The reliability of BGA in IC becomes a concern as the size of IC reduces. ...

    • Shear strain analysis in FSS microchannel 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Nor Shakirina, Nadzri; Tan, Hsio Mei; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publications, 2013-10)
      Microfluidics has motivated the development of various fields in biological engineering due to its advantages. The favorable benefits of using microfluidicsare being easy to fabricate, requirement of minimal fluid volumes, ...

    • Shift of band gap from direct to indirect and optical response of lif under pressure 

      Sajid, A.; Murtaza, Ghulam; Ali Hussain, Reshak, Prof.Dr. (World Scientific Publishing Co. Pte Ltd, 2013-04)
      We hereby are reporting the transition pressure at which lithium fluoride (LiF) compound transforms from direct band gap to indirect band gap insulator on the basis of FP-LAPW calculations. The fundamental band gap of LiF ...

    • Shopping guarantee and customer e-loyalty: a case study of the Shopee guarantee 

      Iffah Masita; Anessa Raihana, Kamsul; Aina Najihah, Aidil; Suhaila, Abdul Hanan (School of Business Innovation and Technopreneurship, Universiti Malaysia Perlis (UniMAP), 2022-06)
      In order to maintain their advantage in the market, the vast majority of businesses now sell their products digitally. Customers' shopping habits have been affected, which has had a ripple effect on the retail landscape ...

    • A short reviews on drone application in 21st Century 

      R. M. Zulkifli; M. A. M. Nawi; S. N. A. Ahmad Termizi; M. A. R. Alias; M. S. M. Shabri; M. S. Kasim; R. Izamshah; A. M. Kassim (Universiti Malaysia Perlis (UniMAP), 2020)
      This article focuses on applying Unmanned Aerial Vehicle (UAV) used in agriculture, technically called a drone. Nowadays, the high-tech revolution has been rapid growth in this modern era, especially in agriculture. The ...

    • Short Term Load Forecasting using Functional Link Network 

      Muthukumaran, Sithambaram; Thyagarajah, K.; Paulraj, Murugesa Pandiyan, Prof. Madya Dr. (EuroJournals Publishing, 2011-04)
      Short Term Load Forecasting (STLF) is an important tool for successful planning and operation of power generating stations. This paper proposes neural network algorithm for STLF using Functional Link Neural Network (FLN) ...

    • Short-Term Vibration Training and Female Jump Performance: A Feasibility Study Investigating a Relatively Low-Cost, Side-Alternating Platform 

      Hawkey, Adam (Kementerian Pendidikan Tinggi (KPT), Malaysia, 2018)
      This study investigated the effects of a short-term vibration training intervention, using a relatively low-cost side-alternating platform, on the jump performance of a young recreationally-active female population. Following ...

    • Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding 

      Mohd. Azaman, Md Deros; Mohd Sapuan, Salit, Prof. Ir. Dr.; Shamsuddin, Sulaiman, Prof. Dr.; Edi Syams, Zainudin, Prof. Madya Dr.; Khalina, Abdan (Elsevier Ltd., 2013-12)
      Reducing volumetric shrinkages and warpage during the injection molding process is a challenging problem in the production of molded thin-walled parts. In this study, the injection molding of shallow, thin-walled parts ...

    • Signal propagation analysis for low data rate wireless sensor network applications in sport grounds and on roads 

      Ndzi, David L.; Muhammad A, Mohd Arif; Ali Yeon, Md Shakaff, Prof. Dr.; Mohd Noor, Ahmad, Prof. Dr.; Azizi, Harun; Latifah Munirah, Kamarudin; Ammar, Zakaria; M. F., Ramli; Mohammad Shahrazel, Razalli (EMW Publishing, 2012)
      This paper presents results of a study to characterise wire- less point-to-point channel for wireless sensor networks applications in sport hard court arenas, grass fields and on roads. Antenna height and orientation effects ...

    • Signal propagation in aquaculture environment for wireless sensor network applications 

      Azizi, Harun; Ndzi, David Lorater; M. F., Ramli; Ali Yeon, Md Shakaff, Prof. Dr. (EMW Publishing, 2012)
      This paper presents results of signal propagation studies for wireless sensor network planning in aquaculture environment for water quality and changes in water characteristics monitoring. Some water pollutants can cause ...

    • Signal propagation modelling for vehicle-to-infrastructure communication under the influence of metal obstruction 

      J. S. C., Turner; A. B., Shahriman; A., Harun; M. S. M., Hashim; Z. M., Razlan; D. L., Ndzi; R. C., Ismail; S. A. Z., Murad; M. N. M., Isa; S. N., Mohyar; M. F., Ramli; M. K. N., Zulkifli (Universiti Malaysia Perlis (UniMAP), 2021-12)
      Connected car has become one of emerging technology in the automotive industries today. This development preludes a rise in vehicular communication studies that primarily targets radio channel modelling on vehicle-to-vehicle ...

    • Significance of the electromyographic analysis of the upper limb muscles of cricket bowlers: Recommendations from studies of overhead-throwing athletes 

      Nizam Uddin, Ahamed; Sundaraj, Kenneth, Assoc. Prof. Dr.; R. Badlishah, Ahmad, Prof. Dr.; Matiur J., Rahman; Md. Ashraf, Ali; Md. Anamul, Islam (World Scientific Publishing Company., 2014-08)
      The purpose of this study was twofold: (i) to review the existing literature on electromyographic (EMG) analysis of the upper limb muscles of present overhead-throwing (OT) athletes during throwing and of cricket bowlers ...

    • Silent selling: Exploring the relationship between fashion retail visual merchandise and impulse buying behaviour 

      Lopez, Mabel O. (School of Business Innovation and Technopreneurship, Universiti Malaysia Perlis (UniMAP), 2023-06)
      Visual merchandising is accorded a substantial amount of importance in the research and practice of current fashion retail today. The conventional reference to a visual stimulus, which was traditionally thought of as a ...

    • Silica microchannel fabrication using fluorine based rie with alas a mask 

      Wan Mokhzani, Wan Norhaimi; Retnasamy, Vithyacharan; Zaliman, Sauli, Assoc. Prof. Dr.; Taniselass, Steven; Ahmad Husni, Mohd Shapri; Norazeani, Abdul Rahman; Abdul Halis, Abdul Aziz (INSInet Publications, 2012-09)
      The silica microchannel fabrication process has been executed with Al thin films as the sacrificial layer during Reactive Ion Etching Process (RIE). CF4/Ar and SF6/Ar plasmas has been used to investigate etch rate of Al ...

    • Silica Titania Optical Thick Film by Multi-spinning Sol-gel process 

      Mohamad Zahid, A. Malek; Uda, Hashim; Mat Tamizi, Hj Zainuddin; Ahmad Makarimi, Abdullah; Aishah, Isnin (Kolej Universiti Kejuruteraan Utara Malaysia, 2006)
      Sol-gel process has been used for producing high purity and homogenous optical thin films. A high quality, crack free optical thin film and low processing cost are key success factor for optical applications especially in ...

    • Silicon Nanotube Tunnel FET as a label free biosensor 

      Avtar, Singh; Ashenafi Fekadu Shifaw; Dereje Tekilu; GangiregulaSubbaRao; Chanda, Manash (Universiti Malaysia Perlis (UniMAP), 2021-07)
      In this paper, we propose a Silicon Nanotube Tunnel FET-based biosensor in which ambipolar current is used as the sensitivity parameter. For fast switching low power consumption and steeper sub-threshold slope, aluminum ...

    • Similarity solutions and conservation laws for rotating flows of an Oldroyd-B fluid 

      Kamran, Fakhar; Kara, Abdulhamid; Morris, Richard; T., Hayat (Indian Association for the Cultivation of Science, 2013-10)
      In this paper, similarity reduction arising from classical Lie point symmetries of unsteady hydromagnetic flows of a rotating Oldroyd-B fluid under influence of Hall currents is carried out. By employing different combinations ...

    • A simple one-step anodising method for the synthesis of ordered porous anodic alumina 

      Voon, Chun Hong; Mohd Nazree, Derman, Dr.; Uda, Hashim, Prof. Dr.; Khairel Rafezi Ahmad, Dr.; Ho, Li Ngee (Taylor & Francis, 2014)
      Porous anodic alumina (PAA) has been produced on aluminium substrate by single-step anodising at 50 V in 0.3 M oxalic acid at 15°C for 60 min. The highly ordered pore and cell structure was achieved by subjecting the PAA ...

    • A simple oxidation technique for quantum dot dimension shrinkage and tunnel barriers generation 

      Madnarski Sutikno; Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr. (Elsevier B.V., 2007-05)
      The tunnel barriers generation and the quantum dot size shrinkage play a significant role in single-electron transistor (SET) fabrication. Because the numerically etch indicators were not found, the technical indicators, ...