Browsing School of Electrical Systems Engineering (Theses) by Subject "Induction motor"
Now showing items 1-6 of 6
-
Application of D-STATCOM to mitigate high inrush current during start-up of three-phase induction motor
(Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2014)This thesis presents the application of Distribution Static Compensator (D-STATCOM) to mitigate inrush current during start up three phase induction motor. Three phase induction motor draws high current during starting ... -
Comparative study of motor high inrush current mitigation by improvisation of soft starter firing angle using PSCAD
Inrush current can be determined as current drawn by an induction motor during start-up period. This starting current will shoot up about 5 to 7 times of rated current. Usually, it was occurred at the starting period of ... -
The effect of different stator slot size on flux and losses distribution in 0.5 hp induction motor
(Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2012)A study of stator slot design is conducted for induction motor in order to improve the efficiency and reduce the losses. In this thesis, the effect of different stator slot size on the flux and losses distribution in 0.5 ... -
Effect of rotor bar size on three phase induction motor performance
(Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2012)This investigation is to determine the effect of rotor bar size to performance of three phase induction motor. The research was conducted in two forms, namely by using the FEM software and laboratory experiments that ... -
Performance evaluation of three phase induction motor using rotor frame 0.35 mm and 0.50 mm of non-oriented steel sheets
(Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2012)In this project, the three phase AC induction motor have been thoroughly investigated and analyzed in terms of the induction motor parameter, efficiency, power factor and loss segregation. Throughout this project, the ... -
Speed control of induction motor using fuzzy
(Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2015)This dissertation presents a methodology for implementation of a rule based fuzzy logic controller applied to a closed loop volts/hertz single phase induction motor speed control. The induction motor is modelled by using ...