Browsing School of Electrical Systems Engineering (Theses) by Subject "Electric motors, Induction"
Now showing items 1-6 of 6
-
Application of D-STATCOM to mitigate high inrush current during start-up of three-phase induction motor
(Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2014)This thesis presents the application of Distribution Static Compensator (D-STATCOM) to mitigate inrush current during start up three phase induction motor. Three phase induction motor draws high current during starting ... -
Comparative study of motor high inrush current mitigation by improvisation of soft starter firing angle using PSCAD
Inrush current can be determined as current drawn by an induction motor during start-up period. This starting current will shoot up about 5 to 7 times of rated current. Usually, it was occurred at the starting period of ... -
Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication
In this project, the 0.5 Hp three phase induction motor have been thoroughly investigated and analyzed in terms of the induction motor parameter, torque, efficiency, power factor, losses reduction, transfer mechanism and ... -
Induction motor drive system performance under influence of voltage sags and interruptions
This thesis presents performance of induction motor drive system under influence of voltage sags and interruptions. The drive system consists of an induction motor and adjustable speed drive (ASD) that connected in series. ... -
Performance evaluation of three phase induction motor using rotor frame 0.35 mm and 0.50 mm of non-oriented steel sheets
(Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2012)In this project, the three phase AC induction motor have been thoroughly investigated and analyzed in terms of the induction motor parameter, efficiency, power factor and loss segregation. Throughout this project, the ... -
Speed control of induction motor using fuzzy
(Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2015)This dissertation presents a methodology for implementation of a rule based fuzzy logic controller applied to a closed loop volts/hertz single phase induction motor speed control. The induction motor is modelled by using ...