Browsing School of Microelectronic Engineering (Theses) by Issue Date
Now showing items 1-20 of 57
-
Design, simulation and process development for Sol Single-Electron Transistor (SET) fabrication
(Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM)School of Microelectronic Engineering, 2006-04)Single-electron transistor (SET) is one of the promising nanotechnologies and distinguished by a very small device size and low power dissipation. This project explains the SET mask design, SET process flow development, ... -
Fabrication of Silicon Nanowires using Scanning Electron Microscope based Electron Beam Lithography method
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007)Nanowires is a new class of materials that have attracted attention and great research interest in the last few years because of their potential applications in nanotechnology such as nanoelectronic, nanomechanical and ... -
Fabrication and characterization of ultra thin Si0₂ for nano devices: surface morphology and electrical study
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2007)The aim of this research is to fabricate and characterize (optical and electrical) an ultra thin silicon dioxide for sub nano devices. In this research, dry oxidation method using high temperature furnace is chosen to ... -
Characterization of alignment mark to obtain reliable alignment performance in advanced lithography
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2007)The continued downscaling of semiconductor fabrication has imposed increasingly tighter overlay tolerances. Such tight tolerances will require very high performance in alignment. Hence, the objective of this research to ... -
An efficient modified booth multiplier architecture
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2008)Multiplier plays an important role in today’s compute intensive applications such as computer graphics and digital signal processing. This thesis described the design of an Efficient Modified Booth Multiplier Architecture. ... -
The effect of Phosphorous implant in converting the Enhancement Mode Transistor into Depletion Mode Transistor
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008)Metal-Oxide-Semiconductor field effect transistor (MOSFET) forms the basis in most of electronic applications. In certain part of electronic circuitry, there is a requirement to use depletion mode of MOSFET which delivers ... -
Temperature cycling reliability test for a ball grid array (BGA) package using finite element analysis (FEA)
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008)Thermal cycling test is one of the reliability test that has been used to evaluate the reliability of the solder joint interconnect in ball grid array (BGA) package. The purpose of thermal cycling test is to characterize ... -
Design and fabrication of quantum dot single electron transistors using scanning electron microscopy-based electron-beam nanolithogrphy
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2009)Quantum dot single-electron transistor (QD SET) is a nanoscale device operated at very low temperature. To fabricate QD SET operated at room temperature, QD must be fabricated in diameter of 10 nm. QD SET promises very ... -
Fabrication and characterization of silicon based vertical electrode nanogap biosensor for protein detection
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2009)The nanogap biosensor is a new class of device that has attracted attention and great interest among the researchers due to their potential applications in nanotechnology. This nanogap device which are fabricated using ... -
Design, fabrication and characterization of CMOS ISFET for pH measurements
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2009)The Ion Sensitive Field Effect Transistor (ISFET) is a potentiometric pH sensor that is easily adapted to a wide range of chemical, biochemical and biomedical applications. The operation of an ISFET is based on the ... -
Fabrication and characterization of microfluidic field effect transistor on silicon substrate
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2010)The development of a silicon-based microfluidic field effect transistor has been carried out. The main objective of this study is to present from concept, the design of a microfluidic FET and to develop its appropriate ... -
Design of subsystems for multiband wireless transceiver
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2010)This thesis deals with the development of subsystems for wireless application. The subsystems are Low Noise Amplifier (LNA), Medium Power Amplifier (MPA), Demodulator, Variable Signal Generator (VSG) and Voltage for ... -
Silicon nanowire sensor from electron beam lithography: design, fabrication and characterization
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011)This study demonstrates the process development of silicon nanowires (SiNWs) sensor requires both the fabrication of nanoscale diameter wires and standard integration to CMOS process. Prior to actual fabrication process, ... -
Microchannel interrogation with twyman-green interferometer
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011)The Twyman-Green Interferometer (TGI) setup for measuring microfluidic channel depth has been developed. The main objective of this study is to develop a non-contact measuring instrument capable of performing depth ... -
Physical and electrical characterization of sol-gel derived BaxSr1-xTiO3 thin films of various composition ratios and thicknesses
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011)Among the various dielectric materials, barium strontium titanate has been extensively studied due to its high dielectric constant, low dielectric loss and high tunability. Barium strontium titanate is a composition ... -
Development of microgap and nanogap automated permittivity measurement system
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011)The goal of this research is to develop an electronic system that integrated with nanogap capacitor biosensor. This system is called Permittivity Measurement System (PMS). It measures the impedance value of the nanogap ... -
Fabrication and characterization of engineered tunnel barrier for nonvolatile memory application
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2012)Non-volatile memory is a solid state memory device that can retain the stored information even when the power is turned-off; examples of a variety of ROMs and Flash Memory. Based on the charge storing mechanism, it can be ... -
Core nucleus polarization in lambda (۸) hypernuclei
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2012)The response of the core nucleus to the L in a hypernucleus is studied with a local density approximation. This reproduces the energies and radii of the core nuclei as well as the L-single particle (s.p.) energies quite ... -
Sol-gel BST thin films for FeFET applications : fabrication and characterization
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2012)The effect of the chemical composition and film thickness of the ferroelectric barium strontium titanate (BST) at the memory window behavior of Al/BST/SiO2/Si-Gatefield effect transistor structure has been investigated. ... -
Investigation of ultrasonification effect on physical and electrical characteristics of Bax Sr1-x TiO3 thin films prepared using sol-gel method
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2012)The characterization of Barium Strontium Titanate (BST) with the ratio of 60:40 and 80:20 in terms of surface morphology and electrical properties to produce the best BST solution according to its various applications has ...