Search
Now showing items 1-10 of 10
Physical and wear properties of aluminium matrix composite reinforced with PSAC and slag fabricated via powder metallurgy
(Universiti Malaysia Perlis (UniMAP), 2012)
A study of physical and wear properties were carried out on pure aluminium reinforced with biomass by product such as palm shell activated carbon (PSAC), slag and PSAC/slag particles. Hybrid and unhybrid aluminium composites ...
Physical properties and corrosion behaviour of Co-Cr-Ni alloy developed by powder metallurgy
(Universiti Malaysia Perlis (UniMAP), 2011)
Cobalt-based alloys have been widely used in biomedical application. In this research, 11 different compositions of cobalt-chromium-nickel (Co-Cr-Ni) alloys were developed by powder metallurgy route. Scanning electron ...
Development and characterization of Co-Cr-Mo (F-75 alloy)/hydroxyapatite composites fabricated by powder metallurgy for biomedical applications
(Universiti Malaysia Perlis (UniMAP), 2013)
Co-Cr-Mo (F-75) alloy is known to be used in biomedical field because of their excellent biocompatibility when implanted to human or animal body. Hydroxyapatite (HAP) powders have been used as filler because HAP is the one ...
Fabrication and properties of Cobalt-Chromium implant composite
(Universiti Malaysia Perlis, 2007)
Cobalt implant composite (CIC) was produced by powder metallurgy technique. Composition of 0% ,5%, 10%, 15% and 20% of hydroxyapatite was mixed with cobaltchromium
alloy. The fabrication technique is mixing, blending, ...
Development of Lead-Free Sn-0.7Cu-Si3N4 composite solders
(Universiti Malaysia Perlis (UniMAP), 2013)
Lead based solder have been widely used before science have proven lead as one
of the hazardous substances which can harm the environment and human health. With
the banning usage of lead based solder as interconnect, ...
Characterization and in-vitro activity of powder metallurgy magnesium-zinc/bioglass composite for biomedical applications
In this study, bio-glass 45S5 powder was added into the mixture of Mg-Zn powders to
produce biocomposite using powder metallurgy method for biomedical applications. The
bio-glass composition was varied from 0, 5, 10, 15, ...
Development od SiC reinforced SnCu and SAC based lead-free solder composite via powder metallurgy route
Nowadays, composite solder has gain researcher’s attention due to its promising improvement in physical and mechanical properties for lead free solder. This study was carried out to investigate the effect of SiC particle ...
The effect of nickel, cobalt and tin on the evolution of microstructural and mechanical properties of Al-Zn-Mg-Cu alloys (7000 series) via casting, powder metallurgy and friction stir processing techniques
Casting and alloying, powder metallurgy (PM) and Friction Stir processing (FSP)
techniques were used to produce Al-Zn-Mg-Cu alloy of superior properties. The main
objective of this research is to improve the microstructure, ...
Direct nitridation of aluminium and fabrication of aluminium-aluminium nitride composite using powder metallurgy route
The enviable attributes of aluminium nitride (AlN) such as; high melting point, good wear and corrosion resistance, wide band gap similar to that of silicon, high resistivity and low coefficient of thermal expansion have ...
Investigation on the physical properties of magnesium feedstocks for metal injection moulding
Magnesium and its alloy are found to be extremely biocompatible and have similar properties to natural bone. This makes them an attractive material for the manufacture of biodegradable parts such as biomedical implant. As ...