Search
Now showing items 1-10 of 13
High temperature corrosion behaviour of austenitic stainless steel with CaCO₃ and MgCO₃ deposit
(Universiti Malaysia Perlis (UniMAP), 2009)
The high temperature corrosion behaviour of austenitic stainless steel was studied at
850°C, 900°C, 950°C and 1000°C for 24 to 120 hr exposure time with CaCO₃ and
MgCO₃ deposit. Two commercial available austenitic stainless ...
Characterization and properties of palm kernel shell reinforced polyester composites
(Universiti Malaysia Perlis, 2009)
Composites of unsaturated polyester (UP)/palm kernel shell (PKS) have been prepared by hand lay-up technique. The effect of filler loading of UP/PKS composites on mechanical properties and morphology were studied. Tensile ...
Properties of water hyacinth fibers (Eichhornia crassipes) filled low density polyethylene/acrylonitrile butadiene styrene composites
(Universiti Malaysia Perlis, 2009)
The water hyacinths are largely available in local rivers. In this research, the water hyacinth fibers have been used as reinforcing components for low density polyethylene (LDPE) and acrylonittile butadiene styrene (ABS). ...
Application of chitosan biopolymer as a sensing material
(Universiti Malaysia Perlis, 2009)
The chitosan solution has been succesfully deposited on the silicon wafer using sol-gel method to fabricate the chitosan thin film sensors. The effect of different annealing temperature and annealing time to their electrical ...
Characterization and mechanical properties of coconut shell filled acrylonitrile butadiene styrene / ethylene propylene diene monomer composites
(Universiti Malaysia Perlis, 2009)
Coconut shell filled ABS/EPDM composites were prepared using a Z-blade mixer at processing temperature 2000C and rotor speed 50rpm.Effect of chemical treatment,different composition of blend ratio , different filler loading ...
A new development of modified dipping process of the prevulcanized natural rubber latex films: Investigation on the tensile and swelling properties
(Universiti Malaysia Perlis, 2009)
Prevulcanized natural rubber latex films were produced by modified dipping process and their tensile and swelling properties were investigated. Two type of natural rubber latex which is high ammonia (HA) and low ammonia ...
Characterization and properties of calcium carbonate filled polypropylene (PP) / ethylene propylene diene terpolymer (EPDM) composites
(Universiti Malaysia Perlis, 2009)
Composites of thermoplastic elastomer blend of polypropylene (PP) and ethylene propylene
diene terpolymer (EPDM) reinforced calcium carbonate (CaCO3) was investigated. All the composites
were prepared by using Z-blade ...
Properties of eggshell powder filled low density polyethylene/ acrylonitrile butadiene styrene composites
(Universiti Malaysia Perlis, 2009)
Eggshell powder is one of the most abundant materials on our planet and has been quite early used in ground form to produce polymer composites. Chemical unmodified and modified eggshells powder filled low density polyethylene ...
Study of microstructure and ageing characteristic of aluminium alloy reinforced with glass particulates
(Universiti Malaysia Perlis, 2009)
Study on microstructure and ageing characteristics has been done on the aluminium
alloy reinforced with glass particulates. Aluminium - 4 wt. % copper composites were
produced by powder metallurgy technique. Composition ...
Corrosion behaviour on powder metallurgy aluminium matrix composite reinforced with alumina Saffil™ short fibres
(Universiti Malaysia Perlis, 2009)
The corrosion behaviour of PM Al composite will be affected by the presence of alloying element and
reinforcing phase in the composite. This studies were focused on the influence of magnesium addition
and alumina Saffil™ ...