Search
Now showing items 11-20 of 23
Study of aspect ratio performance on Silicon Oxide wet etching by using Profilometer, AFM and SEM
(Universiti Malaysia Perlis, 2008-03)
A study of aspect ratio performance on silicon oxide is developing to predict the
oxide profile on surface of wafer. The main focus of this project is to perform and
produce a high profile of silicon oxide under profiler ...
Single Crystal SiC Capacitive pressure sensor design and analysis using MEMS Pro L-Edit and Samcef Field & Oofelie software
(Universiti Malaysia Perlis, 2008-03)
Single crystal 3C-SiC capacitive pressure sensors are proposed for high-temperature sensing applications. SiC is an attractive material for harsh environment micromachined transducers due to its outstanding electrical, ...
Fabrication Of 50 µm transistor and AlNiAu interconnection process
(Universiti Malaysia Perlis, 2007-03)
Generally process fabrication transistor will starts by cleaning the wafer, formation region drain, D and source, S, get oxide and deposited aluminum as contact with the source, drain and gate. Mask is very important thing ...
The Effect of Power Density on the Surface Layer of Amorphous Thin Film
(Universiti Malaysia Perlis, 2007-03)
The development of amorphous silicon (a-Si) device technology since the advent of the first solar cell in 1974 has been truly spectacular with commercial products such as photocopiers, laser printers, facsimile machines, ...
Improvement of SiGe HBT Design and Technology Performance using Device Simulation
(Universiti Malaysia Perlis, 2007-04)
Simulation of the effect of various design parameters on the performance of the HBT is
essential for obtaining the optimized design. This is based on the requirement for a reliable computation of the HBT performance. ...
Design and simulation of Gallium Arsenide based Schottky diodes for RF applications
(Universiti Malaysia Perlis, 2008-04)
Today, being the dawn of a new RF technology wave, the requirement of making semiconductor device which have greater speed in performance, which is realized either as a higher maximum frequency of operation or higher logic ...
Optimization of Nitride deposition process using Taguchi method
(Universiti Malaysia Perlis, 2008-04)
The process of plasma enhanced chemical vapor deposition silicon nitride film which is used as barrier layer for the doped oxide in premetal dielectric (PMD) application and optimized using Design of Experiment (DOE) ...
Optimization on oxidation process using 2K factorial design method
(Universiti Malaysia Perlis, 2008-04)
Silicon technologies progress in the last twenty years has traced the path to the
unprecedented revolution of information technologies, which has changed everybody’s
lifestyles. With the help of software, the world of ...
Design and analysis of low power using Sleepy Stack and Zig-Zag technique
(Universiti Malaysia Perlis, 2008-04)
Now days the design of CMOS becomes greater where the number of transistor in design increased largely. However there are some problem that occurs during the excellent
design and the increasing of transistor where the ...
Analysis of the deposited carbon during Electron Beam Induced Deposition (EBID) in Scanning Electron Microscope using Secondary Ion Mass Spectrometry (SIMS)
(Universiti Malaysia Perlis, 2008-03)
Many experiments on the mechanics of nanostructures require the creation of rigid
clamps at specific locations. In this work, electron beam induced deposition (EBID) has been used to deposit carbon films that are similar ...