Browsing School of Microelectronic Engineering (FYP) by Subject "Mentor Graphic software"

Now showing items 1-7 of 7

    • 16-Bits High Speed Carry Select Adder 

      Nur Syuhada Muhammad Khariri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This report presents the design, performance evaluation of two design of 16-bit carry select adder. The layout for the high speed 16-bits carry-select adder was present in this report. The comparison of both designs is to ...

    • Comparison of Various Barrel Shifter 

      Abg Muhd Zakaria, Abg Abdul Wahed (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      Barrel shifters are often utilized by embedded digital signal processors and general-purpose processors to manipulate data. This project design alternatives for 16 bit barrel shifters that perform the following function ...

    • Comparisons of 2 Bit Mirror Adder, Dynamic Adder and Pipelined Adder Using Mentor Graphics 

      Kamarul Azman Gesly (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      In this project the main topology of two bit adder including the most interesting of those recently proposed, are compared for delay, power dissipation, area and power delay product (PDP) . The comparison has been performed ...

    • Design a Wideband Low-Noise Amplifier for Wireless Communication using 0.35-µm CMOS Technology 

      Mohd Hafiz Abu (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Low Noise Amplifier (LNA) is one of the receiver front end component. Place near antenna, this part used to minimize the noise figure of the amplifier while providing enough gain with sufficient linearity to overcome the ...

    • Stable 2 Stage CMOS Amplifier 

      Ahmad Zainoldiar, Khalidi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      In the last few years there has been an effort to integrate electrochemical instrumentation. A critical component of such a system is an amplifier. These projects design a “Stable Two stage CMOS amplifier”. This is achieved ...

    • Study in Design of 32 X 4Bit Static Random Access Memory (SRAM) 

      Nor Bashariah Muhamad Bakhtiar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Study in design Static Random Access Memory (SRAM) using Mentor Graphic and simulation process with Eldo simulator. The research made on the operation of six transistors, its advantage over Dynamic Random Access Memory ...

    • Synthesis, layout design and simulation of 8-bit Serial Peripheral Interface (SPI) using Leonardo Spectrum and Mentor Graphics tools 

      Siti Aifa Zafirah Ahmad (Universiti Malaysia PerlisSchool Of Microelectronic Engineering, 2007)
      In this project, Serial Peripheral Interface (SPI), was designed. This project will include design, synthesis and simulation of SPI. SPI is a synchronous serial data link that operates in full duplex mode and it will ...