Browsing School of Microelectronic Engineering (FYP) by Issue Date
Now showing items 21-40 of 153
-
Gate Oxide Integrity (GOI) Characterization For Deep Submicron CMOS Device
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Since the early days of Very Large Scale Integration (VLSI) era, the scaling of gate oxide thickness has been instrumental in controlling the short channel related effects in state-of-the-art device structure, as MOS gate ... -
Characterization of Electroless Under Bump Metallurgy for Alsi Bond Pad Composition
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)The characterization of electroless under bump metallurgy for AlSi bond pad composition in term of surface morphology and surface roughness was investigated. By using the sample given, the gold layer need to be deposited ... -
The Effect of Annealing Temperature and Dopant Concentration on the Surface Layer of Vanadium Doped Barium Strontium Titanate (BVST) Thin Film
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Vanadium is classified as a transition metal and is the most important in its group. It finds extensive use in the manufacturing of special steels with exceptional strength and toughness. The dopant concentration of ... -
Polysilicon Process Development – The Effect Of PECVD Process Parameters On The Film Characteristics
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Thin polycrystalline silicon film has been used in the wide range of applications in the production of integrated circuits and other electronic products. Traditionally, polycrystalline silicon is deposited using Low ... -
Designing, Fabricating And Characterizing A Microfluidic Capacitor
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Today, being the dawn of a new technology wave, Micro electromechanical Systems or MEMS have promised a new beginning to a wide spectrum of fields. Microfluidics marked another milestone in this area as highly effective ... -
High speed six operands 16-bits carry save adder
(School of Microelectronic Engineering, 2007-03)Adders are commonly found in the critical path of many building blocks of microprocessors and digital signal processing chips. The most important for measuring the quality of adder designs in the past were propagation ... -
BST Sensor Application: Programmable Night Lamp With Morning Alarm
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)A high potential BST Sensor fabricated at UniMAP’s Clean Room was left unused from any further development even though it has good characteristics. The main aim for this project is to develop an application system prototype ... -
Design a Wideband Low-Noise Amplifier for Wireless Communication using 0.35-µm CMOS Technology
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Low Noise Amplifier (LNA) is one of the receiver front end component. Place near antenna, this part used to minimize the noise figure of the amplifier while providing enough gain with sufficient linearity to overcome the ... -
Effect of Annealing Temperature and Dopant Concentration on the Surface Layer of Indium Doped Ba0.5Sr0.5TiO3 Thin Film
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Barium strontium titanate (Ba0.5Sr0.5TiO3) is one of the most important sensing materials for multi-function sensors. Basically, the sensing properties can be controlled by minor modification of the dopants. The purpose ... -
Simulation on Parameter and Characteristics Extraction Between Two Simulation Packages (Synopsys and PSpice)
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)The progress of silicon technologies in the last twenty years has traced the path to the unprecedented revolution of information technologies, which has changed everybody’s lifestyles. Apparently, this has happened with ... -
Comparisons of 2 Bit Mirror Adder, Dynamic Adder and Pipelined Adder Using Mentor Graphics
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)In this project the main topology of two bit adder including the most interesting of those recently proposed, are compared for delay, power dissipation, area and power delay product (PDP) . The comparison has been performed ... -
Low Power Multiplier Accumulator (MAC) unit using Multiple Threshold CMOS
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)Recently, there has been an increasing demand for portable, battery-operated devices like cellular phones and notebook computers. Scaling causes sub-threshold leakage currents to become a large component of total power ... -
FPGA implementation on secure parking system
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)Secure parking system is a project which could give a comfort to the users for safety parking their cars especially at the apartment and condominium areas. This idea acquired after intensive observation have been made ... -
FPGA Implementation On Alcohol Sensor Vehicle Immobilizer
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)Nowadays, car accident cases keep on increasing from day to day. There are many factors that had caused the accident happen. Among the major factors that caused the car accident are such as the equipment failure, poor ... -
Stable 2 Stage CMOS Amplifier
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)In the last few years there has been an effort to integrate electrochemical instrumentation. A critical component of such a system is an amplifier. These projects design a “Stable Two stage CMOS amplifier”. This is achieved ... -
Ultra low power 8-bit microcontroller using Super Cut-Off CMOS (SCCMOS)
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)As the advances of VLSI technology, low power design has become an important topic in VLSI design. Scaling down supply voltage is an effective way for power reduction because of its quadratic relationship to dynamic ... -
Simulation of Ion Implantation using Monte Carlo Method for Investigation on Ion Trajectories
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)The goal of simulating the ion implantation is to predict the distribution of implanted ions in the target and also to predict the amount of damage generated in the target. During ion implantation process, accelerated ions ... -
Temperature Controller with a digital temperature display
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)Temperature Controller with a Digital Temperature Display was designed to control the intensity of heat or cold and measure the temperature to display the actual temperature of the space between ranges -55°C to +150°C on ... -
Comparison Of Etching Optimization Process By Taguchi Method Using Minitab And Design Expert Software
(School of Microelectronic Engineering, 2007-04)A design of experiment for high throughput pad etch by reactive ion etch is reported. Design of Experiment (DOE) is a technique for optimizing process which has controllable inputs and measurable outputs. The L9 orthogonal ... -
Design and Simulation of CMOS Operational Amplifier using Mentor Graphics Tool
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)Today’s atmosphere and demands continue to drive operating voltages down, especially for widely used components such as the Operational Amplifier. Some of the motivations driving the market are integration, battery operated ...