Now showing items 110-129 of 153

    • Self testable pressure sensor based on phase change 

      Khairul Abidin Karim (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      Self-Testable Pressure Sensor Based on Phase Change is used to analyze the change of voltages. Basically, the device is using a pressure sensor. The use to sense the change of pressure is manipulated to sense the change ...
    • Semiconductor optical amplifier (SOA) for photonic signal processing 

      Latty Shazana, Ismail (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-05)
      This project presents the characteristic of semiconductor optical amplifier in photonic signal processing. The characterization data is analyzed for potential application in photonic systems such as switching and signal ...
    • Serial Peripheral Interface (SPI) (Front End Design) 

      Mohd Noorkasyfi Md Shariff (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008)
      The Serial Peripheral Interface Bus or SPI bus is a synchronous serial data link. This device is one of ASIC design chip that have in the market. In this final year project the new form of device will be created from the ...
    • Simulation and design of 8-bit successive approximation analog-to-digital converter 

      Mohd Farid Kamil, Fadzil (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      An analog-to-digital converter (ADC) is a device that converts an analog unit to a digital unit in order to be used with a digital device. A Successive Approximation (SAR) ADC is an ADC that constantly comparing the input ...
    • Simulation for forming Shallow Trench Isolation in the IC using TCAD tools 

      Mohd Faiz Mohd Fauzan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      A simulation for forming shallow trench isolation (STI) in the integrated circuit (IC) is introduced. Firstly, using the Taurus Workbench-tools, the first silicon oxide layer and a silicon nitride layer are formed ...
    • Simulation Of 0.35 Um NMOS Process Based on UniMAP Cleanroom Facilities 

      Izny Atikah Ahmad Fahmi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      The Micro Fabrication Cleanroom in University Malaysia Perlis (UniMAp) was completed in December 2003 and was built as a teaching laboratory. The goal of this project is to simulate a 0.35um negative-metal-oxide-semiconductor ...
    • Simulation of Ion Implantation using Monte Carlo Method for Investigation on Ion Trajectories 

      Zainab Ramli (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      The goal of simulating the ion implantation is to predict the distribution of implanted ions in the target and also to predict the amount of damage generated in the target. During ion implantation process, accelerated ions ...
    • Simulation on Effects of Different Types of Channel/Drain Engineering Structure on MOS Device Performance 

      Norazlina Mohd Amin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This final year project is aimed to analyze the effects of three different types of channel/drain engineering structure on MOS transistor performance. As a project basis, a 0.35μm process recipe from UC Berkeley is used ...
    • Simulation on Parameter and Characteristics Extraction Between Two Simulation Packages (Synopsys and PSpice) 

      Nor Aznin Sakrani (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      The progress of silicon technologies in the last twenty years has traced the path to the unprecedented revolution of information technologies, which has changed everybody’s lifestyles. Apparently, this has happened with ...
    • Simulation, fabrication and electrical characterization of p-Si capacitor design structure 

      Cheryl She Siew Yuet (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      Technology CAD (TCAD) refers to the use of computer simulation to model semiconductor processing and device operation. TCAD has two major functions which are process simulation and device simulation. It performs the ...
    • Single Crystal SiC Capacitive pressure sensor design and analysis using MEMS Pro L-Edit and Samcef Field & Oofelie software 

      Ruhaizi Mohd Hatta (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      Single crystal 3C-SiC capacitive pressure sensors are proposed for high-temperature sensing applications. SiC is an attractive material for harsh environment micromachined transducers due to its outstanding electrical, ...
    • Smart Arm Robot using Visual Basic program 

      Wee Joo Ann (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      The aim of the project was to design the software using Visual Basic program to control the robot arm, design the electronic circuit and build the Robot Arm. The controlling of the robot arm using wireless radio frequency ...
    • Smart office for indoor based system 

      Chua, Yong Cher (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-04)
      The smart office project emphasize on the design of indoor system of an office. For this project, the system implies the timer controller, magnetic door, person counter controller and infrared sensor. A microcontroller ...
    • Stable 2 Stage CMOS Amplifier 

      Ahmad Zainoldiar, Khalidi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      In the last few years there has been an effort to integrate electrochemical instrumentation. A critical component of such a system is an amplifier. These projects design a “Stable Two stage CMOS amplifier”. This is achieved ...
    • Study and design Infrared Beacon for the blind 

      Mohd Fadzlie Rasit (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      Mobility for the blind is always a great problem. They always need assistance from people around to move to the place that they want to. The present method like a walking stick is effective but restricted them from moving ...
    • Study and Design the Current Mirror using Bulk-Driven Technique for Low Voltage Analog 

      Mohd Faidzul Bukhari Mohd Kanafiah (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Current Mirrors are core structure for almost all analog and mixed mode circuits and the performance of analog structures largely depends on the characteristic. In this design, the design presents some of the low voltage ...
    • Study and improvement of UniMAP Air Shower Room 

      Lau Iyu Pin (Universiti Malaysia Perlis, 2008-04)
      This Air Shower Room is a project that will be used to control air quality especially to all industry and all semiconductor factory. The air blower which is play a main function will absorb the dust and dirt from the ...
    • Study in Design of 32 X 4Bit Static Random Access Memory (SRAM) 

      Nor Bashariah Muhamad Bakhtiar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Study in design Static Random Access Memory (SRAM) using Mentor Graphic and simulation process with Eldo simulator. The research made on the operation of six transistors, its advantage over Dynamic Random Access Memory ...
    • Study of acceleratin voltage influence the Conical structure during Electron Beam Induced Deposition (EBID) 

      Muhammad Afif Abdul Rahman (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      Electron beam induced deposition (EBID) is a well established technique for highresolution direct material deposition from the gas phase onto a substrate. A finely focused electron beam of a scanning electron microscope ...
    • Study of aspect ratio performance on Silicon Oxide wet etching by using Profilometer, AFM and SEM 

      Nur Syuhada Md.Desa (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      A study of aspect ratio performance on silicon oxide is developing to predict the oxide profile on surface of wafer. The main focus of this project is to perform and produce a high profile of silicon oxide under profiler ...