Browsing School of Microelectronic Engineering (FYP) by Title
Now showing items 106-125 of 153
-
Quadrature decoder with position and speed sensing
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)Quadrature decoder is used for direct interface with linear or incremental encoder to get direction, position and speed information from a rotating system. It plays an important role in motor control applications. This ... -
Random number generator simulation and digital ic design from inverse congruential algorithm
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-05)Random number generator is a generation of random number sequence based on random number algorithm, which will produce an unpredictable number of a sequence. This study describes the random number generator simulation for ... -
Reactive Ion Etching (RIE) Etched Wet-Silica-On-Silicon Analysis for Fluid Wettability
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)RIE etched wet silica-on-silicon analysis is more to surface roughness analysis which analysis on silica substrate after plasma etching especially on de-ionized water droplets testing for fluid wettability scope. The thick ... -
Resonant Micromachined magnetic field sensor
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)This project is about the development of a micromachined magnetic field sensor. The operation of this sensor is based on a shift of the resonant frequency of a resonating microstructure in presence of a magnetic field. ... -
Self testable pressure sensor based on phase change
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)Self-Testable Pressure Sensor Based on Phase Change is used to analyze the change of voltages. Basically, the device is using a pressure sensor. The use to sense the change of pressure is manipulated to sense the change ... -
Semiconductor optical amplifier (SOA) for photonic signal processing
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-05)This project presents the characteristic of semiconductor optical amplifier in photonic signal processing. The characterization data is analyzed for potential application in photonic systems such as switching and signal ... -
Serial Peripheral Interface (SPI) (Front End Design)
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008)The Serial Peripheral Interface Bus or SPI bus is a synchronous serial data link. This device is one of ASIC design chip that have in the market. In this final year project the new form of device will be created from the ... -
Simulation and design of 8-bit successive approximation analog-to-digital converter
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)An analog-to-digital converter (ADC) is a device that converts an analog unit to a digital unit in order to be used with a digital device. A Successive Approximation (SAR) ADC is an ADC that constantly comparing the input ... -
Simulation for forming Shallow Trench Isolation in the IC using TCAD tools
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)A simulation for forming shallow trench isolation (STI) in the integrated circuit (IC) is introduced. Firstly, using the Taurus Workbench-tools, the first silicon oxide layer and a silicon nitride layer are formed ... -
Simulation Of 0.35 Um NMOS Process Based on UniMAP Cleanroom Facilities
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)The Micro Fabrication Cleanroom in University Malaysia Perlis (UniMAp) was completed in December 2003 and was built as a teaching laboratory. The goal of this project is to simulate a 0.35um negative-metal-oxide-semiconductor ... -
Simulation of Ion Implantation using Monte Carlo Method for Investigation on Ion Trajectories
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)The goal of simulating the ion implantation is to predict the distribution of implanted ions in the target and also to predict the amount of damage generated in the target. During ion implantation process, accelerated ions ... -
Simulation on Effects of Different Types of Channel/Drain Engineering Structure on MOS Device Performance
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)This final year project is aimed to analyze the effects of three different types of channel/drain engineering structure on MOS transistor performance. As a project basis, a 0.35μm process recipe from UC Berkeley is used ... -
Simulation on Parameter and Characteristics Extraction Between Two Simulation Packages (Synopsys and PSpice)
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)The progress of silicon technologies in the last twenty years has traced the path to the unprecedented revolution of information technologies, which has changed everybody’s lifestyles. Apparently, this has happened with ... -
Simulation, fabrication and electrical characterization of p-Si capacitor design structure
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)Technology CAD (TCAD) refers to the use of computer simulation to model semiconductor processing and device operation. TCAD has two major functions which are process simulation and device simulation. It performs the ... -
Single Crystal SiC Capacitive pressure sensor design and analysis using MEMS Pro L-Edit and Samcef Field & Oofelie software
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)Single crystal 3C-SiC capacitive pressure sensors are proposed for high-temperature sensing applications. SiC is an attractive material for harsh environment micromachined transducers due to its outstanding electrical, ... -
Smart Arm Robot using Visual Basic program
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)The aim of the project was to design the software using Visual Basic program to control the robot arm, design the electronic circuit and build the Robot Arm. The controlling of the robot arm using wireless radio frequency ... -
Smart office for indoor based system
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-04)The smart office project emphasize on the design of indoor system of an office. For this project, the system implies the timer controller, magnetic door, person counter controller and infrared sensor. A microcontroller ... -
Stable 2 Stage CMOS Amplifier
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)In the last few years there has been an effort to integrate electrochemical instrumentation. A critical component of such a system is an amplifier. These projects design a “Stable Two stage CMOS amplifier”. This is achieved ... -
Study and design Infrared Beacon for the blind
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)Mobility for the blind is always a great problem. They always need assistance from people around to move to the place that they want to. The present method like a walking stick is effective but restricted them from moving ... -
Study and Design the Current Mirror using Bulk-Driven Technique for Low Voltage Analog
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)Current Mirrors are core structure for almost all analog and mixed mode circuits and the performance of analog structures largely depends on the characteristic. In this design, the design presents some of the low voltage ...