Now showing items 95-114 of 153

    • MEMS Cantilever beam monitor 

      Muhammad Asyraf Ahmad Zulkifli (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Three cantilever beam monitor has been designed using the same material and dimension. They are the center, left and right cantilever beam with their own contact pad. The center beam can be displaced to the right or left ...
    • Mems Microrelay: Design, Modeling, and Simulation 

      Yap David (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      A newly design of single pole single throw piezoelectric vertical actuation MEMS microrelay was successfully designed and modeled at the end of this project. This was implemented by using MEMS Pro LEdit CAD Modeler. Then, ...
    • Microfluidic Poly-Si Electrodes Capacitor ( Fabrication & Testing ) 

      Esmal Fhadly, Abd Malek (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      In this project, I have to design, fabricate and testing a Microfluidic capacitor. The dielectric insulator is replaced with a dielectric fluid (deionized water) instead of usual solid state materials. The conductive ...
    • Optimization of Nitride deposition process using Taguchi method 

      Low Zen Shiang (Universiti Malaysia PerlisSchool Of Microelectronic Engineering, 2008-04)
      The process of plasma enhanced chemical vapor deposition silicon nitride film which is used as barrier layer for the doped oxide in premetal dielectric (PMD) application and optimized using Design of Experiment (DOE) ...
    • Optimization on oxidation process using 2K factorial design method 

      Yeap Li Chian (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Silicon technologies progress in the last twenty years has traced the path to the unprecedented revolution of information technologies, which has changed everybody’s lifestyles. With the help of software, the world of ...
    • Outdoor system for smart office 

      Tan, Kian Haw (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-03)
      Currently, the automation technologies are available commercially. Basically, this system is designed to be implemented in the outdoor system for smart office. This project is applicable to all sorts of building such as ...
    • PIC based smart lamp control and monitoring unit in airport 

      Mustafa Jalaluddin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      This project representing one product or the rule that easier in the implementation of the switching system that was met in any big buildings like the airport. This is built with made a microcontroller model PIC16F877A ...
    • Polysilicon Process Development – The Effect Of PECVD Process Parameters On The Film Characteristics 

      Mujahidun Mashuri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Thin polycrystalline silicon film has been used in the wide range of applications in the production of integrated circuits and other electronic products. Traditionally, polycrystalline silicon is deposited using Low ...
    • Portable food menu directory using altera devices 

      Chi, Choong Tian (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      The technology field is increased robustly nowadays. The development of technology helps to improving quality and our life style. All work to be done quickly, accurately and with minimal mistake. The major problem facing ...
    • Portable phone directory using altera devices 

      Vincent, Tiong Kwong HO (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      The DE2-70 board and LTM daughter board were the first time using, so a lot of information and function of board are needed to discover. To familiar with the altera devices, user manual of altera devices is needed as a ...
    • Production and charaterization of epoxy syntactic foam filled hollow spheres 

      Hazimah, Rasid (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2016-05)
      The research in this study involves production and characterization of epoxy syntactic foam with hollow spheres (EHoS) by using simple casting technique and innovation process. The epoxy syntactic foam (ESF) comprises ...
    • Quadrature decoder with position and speed sensing 

      Noradliyah, Mohd Murad (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      Quadrature decoder is used for direct interface with linear or incremental encoder to get direction, position and speed information from a rotating system. It plays an important role in motor control applications. This ...
    • Random number generator simulation and digital ic design from inverse congruential algorithm 

      Ahmad Firdaus, Mohamad Razy (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-05)
      Random number generator is a generation of random number sequence based on random number algorithm, which will produce an unpredictable number of a sequence. This study describes the random number generator simulation for ...
    • Reactive Ion Etching (RIE) Etched Wet-Silica-On-Silicon Analysis for Fluid Wettability 

      Noor Aini Hamimah Abd. Rahim (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      RIE etched wet silica-on-silicon analysis is more to surface roughness analysis which analysis on silica substrate after plasma etching especially on de-ionized water droplets testing for fluid wettability scope. The thick ...
    • Resonant Micromachined magnetic field sensor 

      Zaidatul Asikin Abd Muhed (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      This project is about the development of a micromachined magnetic field sensor. The operation of this sensor is based on a shift of the resonant frequency of a resonating microstructure in presence of a magnetic field. ...
    • Self testable pressure sensor based on phase change 

      Khairul Abidin Karim (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      Self-Testable Pressure Sensor Based on Phase Change is used to analyze the change of voltages. Basically, the device is using a pressure sensor. The use to sense the change of pressure is manipulated to sense the change ...
    • Semiconductor optical amplifier (SOA) for photonic signal processing 

      Latty Shazana, Ismail (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-05)
      This project presents the characteristic of semiconductor optical amplifier in photonic signal processing. The characterization data is analyzed for potential application in photonic systems such as switching and signal ...
    • Serial Peripheral Interface (SPI) (Front End Design) 

      Mohd Noorkasyfi Md Shariff (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008)
      The Serial Peripheral Interface Bus or SPI bus is a synchronous serial data link. This device is one of ASIC design chip that have in the market. In this final year project the new form of device will be created from the ...
    • Simulation and design of 8-bit successive approximation analog-to-digital converter 

      Mohd Farid Kamil, Fadzil (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      An analog-to-digital converter (ADC) is a device that converts an analog unit to a digital unit in order to be used with a digital device. A Successive Approximation (SAR) ADC is an ADC that constantly comparing the input ...
    • Simulation for forming Shallow Trench Isolation in the IC using TCAD tools 

      Mohd Faiz Mohd Fauzan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      A simulation for forming shallow trench isolation (STI) in the integrated circuit (IC) is introduced. Firstly, using the Taurus Workbench-tools, the first silicon oxide layer and a silicon nitride layer are formed ...