Now showing items 85-104 of 153

    • Improvement of SiGe HBT Design and Technology Performance using Device Simulation 

      Nurradila Ramlan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Simulation of the effect of various design parameters on the performance of the HBT is essential for obtaining the optimized design. This is based on the requirement for a reliable computation of the HBT performance. ...
    • The influence of the accelerating voltages on the growth of the square structure during Electron Beam Induced Deposition (EBID) method 

      Muhammad Afiq Abdul Aziz (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Electron beam induced deposition (EBID) is a method for high-resolution direct material deposition from the gas phase in the Scanning Electron Microscopy (SEM) onto a substrate. In this project, EBID method has been used ...
    • Intelligent environment friendly rest room system 

      Nor Alina, Khairi (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-03)
      A public toilet is very important especially for the passerby. Nowadays, the rest room had been included with high-tech equipments and facilities in order to increase the user’s ease and comfort. The equipments and ...
    • Investigation and Modeling of Boron Diffusion Reduction in Silicon by Flourine Implantation using Numerical Simulation 

      Chuah Soo Kiet (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      With the increased interest in the use of fluorine co-implantation with boron for boron diffusion reduction in the fabrication of semiconductor devices, it is important to understand the mechanisms by which fluorine ...
    • K-Mean clustering simulation using C programming 

      Mohammad Isa, Ahmad Azan (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      At present, an analysis of the data or information is important in determining or divides into several clusters. Clustering method is one way how to analyze the static data that is used in various fields, including machine ...
    • Line follower robot 

      Azuwan Harom (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      This project is to create a robot that will follow a black line on white surface with microcontroller PIC16F877A to control the robot movements. This project is divided into two parts that electronic system and software. ...
    • Logical effort of CMOS 4-2 compressors for arithmetic circuits 

      Wong, Liang Yuan (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-04)
      The method of Logical Effort on CMOS circuit design for speed, it is implied on a few types topologies of the 4-2 compressor. The delay is calculated with Logical Effort concept, choosing the critical path of each circuit, ...
    • Low cost Radio Controlled (RC) car with speed controller 

      Wan Adzli Wan Ahmad (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      Nowadays, microcontrollers play an essential role in our daily lives. For an electronics hobbyist, microcontrollers will offer a wide range of possibilities that would be otherwise unreachable. A radio-controlled car (R/C ...
    • Low Power Multiplier Accumulator (MAC) unit using Multiple Threshold CMOS 

      Tang Fhan Thin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Recently, there has been an increasing demand for portable, battery-operated devices like cellular phones and notebook computers. Scaling causes sub-threshold leakage currents to become a large component of total power ...
    • Low Power Multiplier Accumulator (MAC) unit using Sleepy Stack technique 

      Aaron Selvam Thangamany (Universiti Malaysia PerlisSchool Of Microelectronic Engineering, 2008-05)
      The main objective of this project is to provide new low power solutions for Very Large Scale Integration (VLSI) designers. Especially, the focus is on leakage power reduction. In this project, a novel circuit structure ...
    • MEMS Cantilever beam monitor 

      Muhammad Asyraf Ahmad Zulkifli (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Three cantilever beam monitor has been designed using the same material and dimension. They are the center, left and right cantilever beam with their own contact pad. The center beam can be displaced to the right or left ...
    • Mems Microrelay: Design, Modeling, and Simulation 

      Yap David (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      A newly design of single pole single throw piezoelectric vertical actuation MEMS microrelay was successfully designed and modeled at the end of this project. This was implemented by using MEMS Pro LEdit CAD Modeler. Then, ...
    • Microfluidic Poly-Si Electrodes Capacitor ( Fabrication & Testing ) 

      Esmal Fhadly, Abd Malek (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      In this project, I have to design, fabricate and testing a Microfluidic capacitor. The dielectric insulator is replaced with a dielectric fluid (deionized water) instead of usual solid state materials. The conductive ...
    • Optimization of Nitride deposition process using Taguchi method 

      Low Zen Shiang (Universiti Malaysia PerlisSchool Of Microelectronic Engineering, 2008-04)
      The process of plasma enhanced chemical vapor deposition silicon nitride film which is used as barrier layer for the doped oxide in premetal dielectric (PMD) application and optimized using Design of Experiment (DOE) ...
    • Optimization on oxidation process using 2K factorial design method 

      Yeap Li Chian (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Silicon technologies progress in the last twenty years has traced the path to the unprecedented revolution of information technologies, which has changed everybody’s lifestyles. With the help of software, the world of ...
    • Outdoor system for smart office 

      Tan, Kian Haw (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-03)
      Currently, the automation technologies are available commercially. Basically, this system is designed to be implemented in the outdoor system for smart office. This project is applicable to all sorts of building such as ...
    • PIC based smart lamp control and monitoring unit in airport 

      Mustafa Jalaluddin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      This project representing one product or the rule that easier in the implementation of the switching system that was met in any big buildings like the airport. This is built with made a microcontroller model PIC16F877A ...
    • Polysilicon Process Development – The Effect Of PECVD Process Parameters On The Film Characteristics 

      Mujahidun Mashuri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Thin polycrystalline silicon film has been used in the wide range of applications in the production of integrated circuits and other electronic products. Traditionally, polycrystalline silicon is deposited using Low ...
    • Portable food menu directory using altera devices 

      Chi, Choong Tian (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      The technology field is increased robustly nowadays. The development of technology helps to improving quality and our life style. All work to be done quickly, accurately and with minimal mistake. The major problem facing ...
    • Portable phone directory using altera devices 

      Vincent, Tiong Kwong HO (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      The DE2-70 board and LTM daughter board were the first time using, so a lot of information and function of board are needed to discover. To familiar with the altera devices, user manual of altera devices is needed as a ...